Redmi Note 10 Pro Disassembly / Teardown | Processor | Battery | Motherboard | Redmi Note 10 Pro

LIKE- SHARE- and SUBSCRIBE Our Channel For More
Videos and Your Support.. Thank You.....

Redmi Note 10 Pro Reassembly
Redmi 10 Prime Disassembly / Teardown

Hi.Friends This Video Shows full disassembly of Redmi Note 10 Pro. Redmi Note 10 Pro and Redmi Note 10 Pro Max Same Process for Disassembly .This Video Useful for changing Redmi Note 10 Pro Battery , Back Panel , Fingerprint Sensor , Charging board, Ringer, Speaker ,Motherboard etc....Please Watch Full Video and Comment Your Opinion on This Video..Thank You..(( Please Watch Full Video ))

Warning: Teardown will void your warranty so if you are planning to do the same on your device, keep that in mind.

Video Shortcuts...
Redmi Note 10 Pro Opining Back Panel 00:45
Redmi Note 10 Pro Back Door 03:10
Redmi Note 10 Pro Middle Frame 04:20
Redmi Note 10 Pro Fingerprint Sensor 05:25
Redmi Note 10 Pro Battery 06:10
Redmi Note 10 Pro Quad Cameras 07:55
Redmi Note 10 Pro Motherboard 09:10
Redmi Note 10 Pro Processor 10:10
Redmi Note 10 Pro Internal Volume & Power Button 10:30
Redmi Note 10 Pro Ear speaker 10:35
Redmi Note 10 Pro Ringer 11:05
Redmi Note 10 Mic 11:58
Redmi Note 10 Charging Pin 11:58
Redmi Note 10 Headphone Socket 09:36
Redmi Note 10 Pro SUB Board 11:15

Our Latest Videos ...Watch Now.. .......
Redmi 10 Prime Disassembly / Teardown

Redmi Note 10 Disassembly / Teardown

Samsung M12 Disassembly / Teadrdown

Realme Narzo 3A Disassembly / Teardown

Realme 7 Full Disassembly / Teardown

Redmi Note 9 Pro Teardown / Disassembly

Redmi Note 8 Pro Teardown

Realme C11,C12,C15,Narzo 20,Narzo 30A Camera Glass lens Replacement

Realme C15 / Narzo 20 Disassembly

Infinix Hot 10 Full Disassembly /Teardown Video

Realme C11 Disassembly / Teardown

Redmi 9 Prime Disassembly

Infinix Hot 9 Full Disassembly / Teardown

Realme Narzo 10A Full Disassembly /Teardown Video

Realme C3 Full Disassembly / Teardown

Redmi Note 8 Pro Teardown

Repair Tools.....................(affiliate)
E8000 50 ml Adhesive Glue
Screwdriver Set Multi Pocket Repair Tool Kit
Opening Metal Pry Tool Repair Kit
3 in 1 SMD Rework Station with Micro Soldering iron and Battery booster
Hot Air Gun Soldering SMD Rework Station
Screwdriver Set Multi Pocket Repair Tool Kit
heavy duty spudger tool and Cell Phone Screwdriver Set Repair Opening Tool Kit
Hi Friends ..Please Take Care of model , colour , size ..etc before Purchasing any item in online..thank you
............................................................
Redmi Note 10 Pro Disassembly
Redmi Note 10 Pro Teardown
Redmi Note 10 Pro Processor
Redmi Note 10 Pro Battery
Redmi Note 10 Pro Motherboard
Redmi Note 10 Pro All Internal Parts
Redmi Note 10 Pro Battery Replacement
Redmi Note 10 Pro Charging Board Repair
Redmi Note 10 Pro

[christopherastley]

Thanks for the video. I used this to replace my charge port. For anyone who needs to do the same there is one more screw to remove on the middle frame shown at 3:46. It's the one in the middle by the camera that is covered by an orange sticker.

[sumesh]

No words to say... Well done dear... Thanks

[asir-thebrand]

😂Just bought redmi note 10...❤half an hour ago.. And login to Google account.. After this is my first video😁

[jayantamukhopadhyay]

Total video is outstanding . You are really great teacher and also great technician.

[Ali-oneboy]

Woow very nice phone even from inside.

[uvesh]

Amazing and very nicely opened, Please tell me I didn't find where ia liquid cooling in this phone as I have seen in POCO phones there's liquid coper pipe in the phone, is this phone Trustable for not getting heat up.

[laurat]

Just want to say thanks, and to warn others, for pointing out that you need to be careful taking the back cover off around the power and volume buttons because that gold finger print ribbon WILL get ripped. I watched another video when I was trying to fix my smashed camera lense and the other video gave absolutely no warning about this ridiculously exposed and stupidly positioned gold ribbon, hence my camera lense replacement turned into a fingerprint sensor replacement, hence how I found this video. Ironically, the video I watched for the camera lense replacement wasn't even for the Note 10 PRO, it was for the Note 10, and for the Note 10 Pro, you don't even need to remove the back off the phone to replace the camera lense, so I ended up severing the fingerprint sensor for no reason. The back is fairly hard to get off and this ribbon is right where you drag your tool around the edge so it's almost inevitable you'll butcher it - my advice is to leave that but til last, and go around all the other edges, then pull that last bit apart manually and gently. In terms of the fingerprint sensor, what a horrible job. This video is brilliant but also doesn't show how hard it is to get an entry point for getting the middle casing off, which I found to be really difficult and I was waiting for a screen smash tbh. Furthermore, I don't know why, but my middle casing wouldn't come off entirety. Something was causing it to be stuck down to the right hand side of the camera so although all the edges were free, it wouldn't pull off due to being stuck by something in the top middle (yes, all screws were removed). I really tried to remove it but it snapped the plastic at the top between what looks like the speaker holes. So something important was obviously holding it down and I didn't fancy totalling my whole phone so I tried to fit the fingerprint sensor by leaving the middle casing on and pulling it up. This took 3 hours of continuous trial and error, and took years off my life. This thing needs full access and even then, it looked pretty fiddly in the video, so multiply that roughly by 4 million and you've got an idea how near impossible this was was the middle casing still attached. By some miracle, I got the button in, so I taped it in to it's hole to keep it secure and got to work on pushing its miniscule holding clips (one of which has the offending gold ribbon with it, more opportunities to mangle it again!) behind the miniscule plastic housing. A toothpick and tweezers and The Lord are essential. Next job, getting the chip into it's housing. Hahaha, its housing is underneath the part that needs to come off with the middle, which is the part which seems to be stuck down by something immovable. Basically it's like threading a needle and sewing a button in the dark. You manage to lift it by about 5mm and hit and hope for a couple of hours before you all of a sudden feel a small click and freeze in fear of budging it off again with your hands which have now been trembling for half a day of your life. Retreat at the speed of a snail and.reconstruct. Tldr; the camera lense can be replaced easily and without removing the back cover. If you remove the back cover for any reason, you almost certainly will cut the finger print sensor. The middle casing doesn't come off.

[rklauco]

I wish I had so steady hands :) Thanks for the video, really helpful!

[srammanokar]

This has helped me, saved my day.. thanks

[sajidrahman]

Me watching this video from note 10 pro😂

[hotboy]

I'm watching from redmi note 10 pro it was very good phone and amazing no heat issues

[marwat]

Since you may have opened various brand of smartphones which one you think have done great job in case of hardware like number of switches for many things to connect and reconnect easily or removed easily, hardware durability, simple pattern to adjust many things in small area inside a board etc...

[kuminhsv]

thank you very much for this! I hope you can make more about another phone so we can now how to fix them or can not ... tks

[dedikmahendra]

There is not a OIS, thats focus mechanical, there is mi10t pro which use OIS in budget price

[mhagamingmotovlogs]

Watching your video from Redmi note 10 pro same color as yours

[jparkhku]

Main cam lens for M2101K6G model should be 108MP

[neonowka]

Does the sound of something loose when you tap the camera with your finger or put the phone vigorously on the table indicates a damaged phone or is it something from the stabilization of the camera and it should be so?

[bivekforever]

Brother, did you checked the display manufacturer name ?

[bobundad]

Keeping an eye on recent Xiomi trend of withdrawing special and unique MIUI features like Second Space, I request Youtubers to please highlight such withdrawal in their reviews of Xiomi mobiles like Mi, Redmi and POCO to help viewers take an informed decision.

[pfff-doh]

FYI: the easiest way to disconnect the frame is to start under the SIM card tray, there just a thin plastic piece that can be easily bent away of the frame.