1999-2013 Chevy or GMC tail light issues

#Chevy #GMC #Silverado #ChrisFix
1999-2013 Chevy or GMC tail light Combination Junction Block
I'm glad you've joined me for my new video! Remember to SUBSCRIBE and click that notification bell to get my videos to you right away! Also thumbs me up... "Like the Video!" LOL It helps me out in getting the video to more people who may want to see videos like these! THANK YOU and Enjoy the Video!!!

[myboys]

Thank you I couldn't figure out what was wrong with the tail lights didn't even know that board existed. Lol

[bounce]

I just bought a 2004.5 Chevy 2500hd duramax and I’m having trouble with my driver side rear running light. Brake light, turn signal, and reverse lights all work bud for some reason my running light won’t come on. I just bought a harness for $30 and hopefully that fixes it. Thanks for the video love when people take the time to help others. Cheers 🍻 from Newfoundland!! God bless Ukraine 🇺🇦 and there resilient people.

[lordapprentice]

Try the relay 4 the parking lights under the hood. I shorted mine with a multimeter across the resistor and it clicked then my taillights started working again. Quick and EZ

[Joseph]

Thank you Paps for this great video mechanic got me 1st time, not paying them. Am fixing it myself .

[hectorpaniagua]

FYI all you need to do is remove the screw on the right and the whole thing comes out, remove the electrical wires then remove the board by prying on the left side tab and then sliding it out

[camduran]

Excellent video! Very simple. Now if only I could get my damn old hands to work. 😂

[manuelbustos]

I just found your video, I've been having trouble with my brake lights also. Replaced fuses and the brake pedal switch, taillight housing ( I bought her used; someone put after market LEDs on it). All possible fuses under hood and fuse block under dash. This may be my final answer, (I hope it is). Thanks for putting this vid out there, I'll check back to let you know... Thanks again!

[waynesalekin]

Thank you very much! This was driving me crazy!

[nringle]

You can take the metal bracket off prior to removing the junction.

[joshm]

Spray pb blaster around the old board. When you it it to the left, be sure to only knock it to the tab holds. It comes off with ease

[cartelmigi]

Do yk if this will fix my light I have leds and when it’s night time I turn my rear light on the ones that just run during the night and the one on the driver side dose not turn on nor does the license plate light

[cliffords.]

I take it if all of my taillight bulbs do not work, this is the part to replace? My Left taillight all three bulbs do not light up, but the brake light does only on one of the dual filament bulbs. My right taillight only one dual filament bulb works for taillight and brake light. Both small side lights single filament bulbs do not light up. That would make sense to replace the circuit board you replaced in this video.

[waynesalekin]

That was super helpful. Thank you very much!

[frankiefrank]

This has to be my issue... With I could thumbs up this twice

[D]

Having trouble with tail lights on a 2010 Silverado . The top light on the driver side won’t stay lite up. But the signal well blink .

[okidokidiego]

You have to take off the whole metal plate, there is a bolt and come off with the bird and is easier to do this way. Thank

[jamesweiser]

All my lights work except for the plate lights. I removed the plate light harness checked for breaks in the wiring tested harness everything good and fuse is good.

[rafaelgalvez]

Think this would fix problem with my led lights 🧐

[rwk]

The ground wire above the spare tire mount broke, that caused my taillight problem.

[jasoncovert]

I don't have one on my Chevy suburban 2001 my passenger side license plate light and passenger side tail light not working I put New LED lights in the license plate didn't fix the problem all the fuses are good too