Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics

A line is a single-dimensional drawing quantity. When a line is used to connect any two points along the shortest path, then it is called as a straight line. The topic "Projection of lines" in Engineering Graphics describes how different 2D views of a line has been drawn in a drawing sheet. The line is usually located in the first quadrant formed by the principal planes and followed the first angle projection.

There are four different positions of a straight line as follows,
1. Parallel to both the planes
2. Parallel to one plane and perpendicular to the other
3. Parallel to one plane and inclined to the other
4. Inclined to both the planes

Watch this part-2 Tamil video (Lecture 8.2) that explains how to draw the projection of a given line in problem number 1 & 2.

English Version:

Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics

Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan

Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics

Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan

Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics

Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan

Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan

Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan

For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :

[deepaksivakumar]

Easy to understand and explained in a very detailed manner.Please continue with the good work

[Avagadoing_memes]

Thank you sir
Excellent 👌 keep going sir 👍

[engineeringdrawinggraphics]

prof
In first angle projection, VP is to be above x y and h p is to be marked below x y

[yasinsherif]

We want to keep it sir it is very helpful

[keerthivasan]

Sir one dout xy linenukku mela vp nuthana podanum neega Hp nu poduriga

[sivasothytharsi]

Could you please upload video for assembly drawing?

[lokeshloki]

Vp and Hp neenga change pannirukinga why ?

[cfdevadharshini]

Prof
Intha method la mattum yen third angle projection a use panurom?