How to Adjust an Orbit Adjustable Nozzle

Показать описание

In this video we show how to adjust an Orbit Adjustable Plastic Nozzle. The process is simple and takes just a few seconds.

Products Used:
==========
VISIT US AT:

FOLLOW US ON:

Рекомендации по теме

Комментарии

Thans for the demo of how to adjust the width of the spray pattern, but how do you set the direction of the spray pattern. I have something similar next to a wall, and I need to alter the direction of spray.

JeffCauhape

Thank you as a (dreaded) DIYer/homeowner/business owner I appreciate this video very much. I didn't want to putz around with it and have it fall apart. Mucho Gracias!

Yermove

Well this just saved me from getting soaking wet in the next week or so when I have the courage to change mine out! Thanks in advance!!

stringfellowhawk

My gosh, thank you thank you thank you! I am just learning this stuff and went through way too many demonstrations learning nothing clearly until yours.

cindysinclair

Simple and excellent explanation. Great!

chorty

Where would I obtain the tool that holds the spray full extended in order control the distance of spray ?

charlesmurray

What does the Philips screw head that is underneath the nozzle do? I know the top one adjusts the throw of the water for instance I have an orbit pro 12A. So turning the center flat head screw will get me or lose me some feet. But I don't know what the Phillips head screw underneath it does.

marteebus

Awesome! Saved me hrs trying to figure out what to do.

yshaw

returning all the orbit sprinkler heads I just purchased as the center screw on the brass version is too tight to adjust

astroken

So at a 6ft increment, is it better to turn up a 4ft nozzle head, or turn down a 8ft nozzle head? Thanks

starcarpet

My new 15a only goes out one foot with a 360 deg radius. Your customer service only offered this video. I can get the screw to turn with out risk of stripping? Help plz!

ericsmoviecars

Thanks for the video. Simple to follow except I cannot adjust the spray distance using a screw driver. I have taken it back to Home Depot for them to try and have had friends try to do it but nobody seems to be able to turn that screw. Is there something I am missing - maybe a trick to turn the screw!

supermomretired

I am getting brown spots, within 2' of the front of my orbit sprinkler head. I opened a can of tuna, ate the tuna, and placed the empty can in various places around the sprinkler. After running the sprinkler for 8 minutes, I was seeing in the brown areas that the water was about 1/4" deep in the can after the 8 minutes, but in the green areas the water in the tuna can was nearly at the top. Are there better quality adjustable sprinkler nozzles that will have more uniform distribution of water? In other areas of my lawn, I use the Orbit double distance brass heads which are not adjustable, and see no problem at all. Using the tuna measurement, the water distribution around those heads is much more even.

jimbusse

What about a shrub head nozzle? I replaced it but aiming it is tricky.

Gigmeister

Hi - I have a big question. I just replaced my older sprinkler heads with Pro 12-A. However on three of of the 5 sprinkler heads, I am getting continuous seepage. Can you assist please? I'm at my wits end. Thanks.

jfaithe