Chuwi V88 Unbrick How to Unbrick Hard Bricked V88

In this video i Show you guys how to UnBrick your hardBricked Chuwi V88 .
I think this Method can be used on other RK3188 devices to .

Thanks to the guys at Slatedroid and XDA.

[agentmattk]

Thank you, your video fixed my Amicroe Touchtab IV RK3066 tablet . 7 & 8 or 8 & 9 didn't work for me, so I just shorted pairs one by one along that side and it booted. Thank you again!

[Xlife]

Oh yeah! Thank you for this video! You are helped me to fix Chuwi V88!

works like charm!!! i have noname retina tabletand your video help me. thanks

[javiercrespo]

thank you very much.... chuwi v88 bricked, black screen only. It took me almost a day. I do not know how I got it. I have played several times in the same places but one of the times recognized the tablet. I had pressed vol up. Thanks . . Ufff

[TheRegistrant]

This video saved my chuwi, bricked mine trying to update too, could you make a tutorial video how to update to 4.2.2?

[guilhermeseles]

Aqui funcionou muito obrigado, eu pensei que tinha perdido o meu dispositivo 😅

[khokhosam]

Thank you Thank you very much my brother

[TjinChatterpal]

You can use a paperclip or needle to short the pins .

[vktrsm]

Doesnt matter what nand do you short, both have those pins conected at the same place, they are two 8192MB HYNIX, together they make 16 gbs.

[TjinChatterpal]

Take a small metal strip like the needle im showing in the clip and make sure the 2 pins touch eachother true the metal of the needle.shortcircuit

[Tank.d]

Thanks A Lot...Works For Kaiboer F4...

[guilhermeseles]

Please could you tell me what the procedure was, I don't know English

[wyup]

Thanks for video. I need a rom to install for my ZTE KIS to erase the idb. The ZTE site has an update.zip rom, but doesn't have the *.img files, only boot.img. Do you know where can I find them?

[petermatura-juhasz]

How many times to shorting pins? I have'nt working :(( i have chuwi v88s and on screen is "This operation did not do, because of not supporting!' What can i do?? Thank you!

[Mobailism]

If it's not work, just short any pins. In my case, it works well.

[somerandomguyfromthestreet]

i can erise my IDB and it says erasing IDB OK but when i try to put new firmware it says IDB FAIL

[SuperAlexfiles]

if its not working just try with other pins and it will work, as for me it worked with 13 and 14 pin.

[joeltan]

hi sir Tjin, please help me. my device is ifive mini 3 (RK3188), i have hard bricked it when trying to install a custom rom. is this method also applicable to my device? also, should when i short the pins, should the tablet be connected to a usb and switched on? 

please help me sir.. thank you in advance..

[guitarification]

i need the bios of chuwi v88, please!!

[NaHu]

dear Tjin Chatterpal, i doing what you did, and tried short every pins without any results! can you please help?