Explorer 5r55w Valve Body and Solenoid Pack Install!!! Transmission Slips O/D Light Flashing!!!

preview_player
Показать описание

Have Kids? Check Out My Other Channel!
Рекомендации по теме
Комментарии
Автор

You are one of the best teacher I've seen, not forgetting the important details. Thank you so much

dancuevas
Автор

Very good teacher. I don't even own one of these and I watched the whole thing. Great job as always.

ezelk
Автор

Bro, you could've done a follow up like you said you would, even though it didn't fix the issue, so that we knew. Thanks for the videos but damn.. that was a while watching those 2 vids, searching your channel and then the comments here to find out nothing worked.

SeanKana
Автор

Make sure you salt the water. Nothing worse than a bland separator plate.

r-prizzle
Автор

Thank you for the video mate. I’ve recently replaced the solenoid pack for my 2008 ford ranger as was having changing issues and seen that was a common problem. However had no change. I’ve seen top and bottom gaskets on eBay. Will give this a go.

victortepurei
Автор

They sell spray on gasket remover that works well on these. You can get it any just about any auto parts store.

perjian
Автор

Come on man!!! Lol did it fix the issue??

scottcalihan
Автор

I did the same thing in a flat baking pan, and it had my entire apartment smelling like transmission fluid

DDP
Автор

Just did your job on a 2000 Ford Ranger. I left the manual valve lever out by accident. How did I know? Every gear was forward even reverse. I'll fix it in the morning..

bjenks
Автор

Last time i boiled a part in my kitchen wifey thru out the pot

chalinoahuesoduro
Автор

Ah ha I've got a solution for the stove. I just picked up a huge roaster over for the garage items for $20 😉

tilt
Автор

You can't clear the transmission adaptive tables by disconnecting the battery. They're stored in non-volatile memory. You need a scan tool for that. You can do it with an ELM327 and the Windows version of Forscan.

SwapPartLLC
Автор

You doing just fine man. That's cool keep teach me I'm going to be doing this here soon

davej.
Автор

And still not one reply to confirm if this fixed the issue🤦‍♂️

frankgarcia
Автор

Did these repairs take care of the flashing OD light?

I have an 04 Explorer and the light started flashing today but all the gears shift fine, even Overdrive. I planned on hooking it up and checking for codes but I wanted to see what kind of job i might be in for.

zackaryray
Автор

Need to get yourself a outdoor Turkey fryer so u can boil lol outside.🧐😉

mattsadach
Автор

Hey man, my nephew is the guy who bought the yellow mustang, I was one of the guys doing the shoot on it that changed it from yellow to black/ grey... I've got an 02 explorer 4.0 4wd with the blinky OD light and limp mode, wondering if this solenoid block repair fixed it.

timothyarnold
Автор

Did you ever take it for a test drive so I could see how well it worked, I have the same problems, so before I do what you did I wanted to know if it worked out

colonialroofingofnorthcaro
Автор

question, did you do the valve body because the solenoid pack replacement didnt do anything? I replaced the transmission, replaced solenoid pack and still have OD light flashing and it says solenoid malfunction and also solenoid electrical error codes.

juansalgado
Автор

You rebuilt this whole transmission while it was still up in the car. WOW

dangatto