Best Jigsaw Blade? Types of Accessories & Blades EXPLAINED

Choosing the best jigsaw blade for what you’re working on is key to getting quality results. Sometimes you just need to cut quickly and other times you want a better finish or to make tighter turns while you cut. Your blade choice has a big effect on all of these. Whether you’re cutting wood, plastic, metal, plexiglass, or any other practical material, you’re sure to find a blade to get the job done in this jigsaw blade buying guide.

BUY HERE NOW:

#Jigsaw #DeWalt #MilwaukeeTool

[jontnoneya]

Really helpful vid - short, to the point with lost of great info! THANKS!

[joshuamcguire]

This is the video I needed! Thanks for uploading

[richardpcrowe]

I just purchased a set of 36 jigsaw blades with 22 different types for various uses. I never knew that there were so many different types of blades..

[ricbst]

What do you recommend for a straight cut on mdf?

[legend-slayer]

Thank you I am putting laminate in my house and and not sure what blade I needed as it kept cracking at the edges your video was brilliant very informative thank you

[TheWilferch]

What's the difference in "T" number....I see T101 and T118. Also...How do you get a thicker blade ( if there is one), to better-assure the blade doesn't curve sideways, on the bottom of what you're and stays straighter with the top of the cutting surface?

[AB]

Hi, what is best blade for cutting 2X4 ? do I need longer blade?

[livenhappynus]

I'm working on a small wood project for indoors and I chose poplar wood board for my project. And I need to cut a half circle on the end of the poplar board. In the past I've used a Dewalt jigsaw and it completely froze/locked or died on me not sure what the correct term is used . But I know it was my error my guess was I used the wrong blade and forcing the cut. Sense then I've purchased another jigsaw I slowed my cuts my question is which jigsaw blade do you recommend to cut a curve on a poplar hardwood borad ?

[bgnoggin]

What about the old style blades? Is the only difference ease of install or should I scrap my old faithful saw for the new style?

[ryan]

What’s a good blade for cutting wood rounds in plywood? I bought 10 tpi and the wood is bouncing around even though I have it clamped to a table. I had a skinnier blade before it bent.

[subahrajput]

Which blade should I use for hard wood & size about 35 mm thick

[frankbaughman]

With a De Walt jig saw and 20tpi blade cutting curve in 3/4 plywood it leaves a slant in the finished cut.
How do i correct this?
Thank you

[iraklibeggi]

What do the letters (AOF), (B3) on the jigsaw blade mean? For example T101(AOF), T101(B3) and others.

[alfredomarquez]

Given the VAST AMOUNT of available blades, this video just doesn't make sense.

Next time, try to do an acceptable job, will you? You completely missed the type of tooth, the Section of the blade, the rake, and the many many other kinds of blades available.