I will tell you the technique of welding thin metal that I have studied for decades for free

[vithurakkaran]

Just adjust welding machine voltage broo
Soo easy 😊

[kasundevasinghe]

Lack of fusion
Lack of penetration
Porosity 😂

[diogoribeiro]

Let’s be real, with a material that small in thickness you might aswell tig it or do it the naval way, a downhill pass to had material, clean it and then do a uphill pass with 7018

[derekfearon]

Pretty sure you could've just turned down the voltage setting on the welder.

[ektorkiritsios]

If the material is under2, 5 mm this is the corct way .1- ampere 2- materiale of eletrode, 3-where iof both sides you will put the negative 4- spesor of material All those must be considerate when you weld .

[JerryHAHA_]

How to be under-qualified for a welder

[garythompson]

Texas tig, just turn the dam machine down ffs

[Pizzagulper]

How hot to do you have to have it at in order to burn though that rod. Dang.

[andreywzk]

At this point I just literally have nothing better to do

[helioslavadopines]

No recuerdo como regular el amperaje para cada trabajo...

[juliochile]

Gracias ahora podré distraerme en el trono 😅

[GraysonRomey]

My dumbass thought it said RDR2 and not R2D2

[canbolat]

Sadullah beğenmedi. Acilen spiralle düzeltmen lazım. Çocuk elini sürermiş

[Meviolealdeabajo]

No mms tiene super alto el amperaje de ma la quina, yo cuando soldo barras de ese gruesor no se derrite y no se deben derretir

[JimPrine]

Why not teach how to do it properly rather than how to use what we from the trade call a dutchman.

[АлексГодин-ей]

Стык нормально подготовь и не надо ни чего ляпать

[diyfamily]

What a con job. Notice the round bar disapeared from the first faild attempt so it burned through. Then on the second atempt on the right hand side of the post the planed weaving vertical up weld was clearly forgotten to be carry out, so an edit half way through that weld with a different camera angle was substituted as the finished tidied up weave weld. Nice try.

[alpachino]

Bruh, I'm sorry to say that you really haven't learnt anything...

[skourpi]

I’ve seen you weld and you can do a pretty good job at it. Why are you doing this that makes it look like you have zero skill and zero common sense.