7Segment Digital Clock using WS2812B LED and Arduino-12 Hr time Display|WS2812| Arduino

This clock works with Arduino you can use Arduino Nano Or UNO with WS2812B led and DS3231 RTC. It Display multi color,LDR control brightness & Display 12 hr Time format

Patrs List :

LED -WS 2812B led Strip (114 numbers of LED)
Arduino Board (UNO/NANO)
DS 3231 RTC
470 Ohm Resister 1 Nos
Push switch 2 Nos

******** If you wish to build 24 Hr please let me know in comments ********

OR

*\ You can get the 12 Hr with 114LED Circuit details and Code from below link /*

------------------------------------------------------------------------------------------------------------------------------------------------------
*\ You can get the 12 Hr with 30 LED Code from below link /*
if Your using WS2811 LED then please change the line no 73
" WS2811 instead of WS2812B"

#WS2812 #Arduino #Diy #12hr #7SegmentDigitalClock

[साहूजी-यथ]

thankyou mem aap ne help kiye thanks aap ke help se ban gaya mera digital clock

[erdkunde]

Good project, but I think if colour pf display change every hour instead of each minute, it will be less disturbing and looks stable.

[jyotirao]

Hello mam i have seen your clock video I like so much

[bommananageswarao]

Achcha banaya ji 6 digit ka 2 led wali banayea ji❤

[derisly]

Hello. Do you have code for a 12 hour that doesn’t need the full 4th digit ie 8 + 28 + 2 + 28 + 28? This is so extra leds are not needed.. regards.

[PHANTOm-wbmr]

Good one👍👍. Thanks for sharing this video..

[anmolkx]

@Dhansa's World Thanks for uploading the video. I want make this clock but I want to add 2 more digits for the second. what i can do. can you share the code for the extra 2 digits for the second?

[thezombieguy]

I made the similar version with Bluetooth, alarm, RGB rainbow mode and normal random color digits, and ldr, day of week, battery indicator etc.

[sufisongsroohanichannel]

Sister I have made 86 led clock, its working and showing time but issue coming.
1. When I set the clock first digit go 1 to 19 when I powered on than set the hour.
2. First digit show half 0.
3. When clock show temperature show after first digit show half led on, A, b, d, e and e on and c, f, g segment off.
4. First digit one led of b, segment not working led is OK when show temperature show that time same led working.
Pls guide me where is a fault. Thnx

[pascualpalacios]

Hello Dhansa's, mount the circuit with 30leds, one led for each segment would be 28 + the 2 points 30, the problem is that all the leds of the segments remain on, I give the serial monitor and it does not show me time or temperature I have DS3232, I put your libraries, you can help me.

[sharryturna]

hi . i haave made the same. Problem is in first digit that there is not proper zero

[waseemiqbaal]

Thank you

PLZ HELP ME IF I WANT TO USE 1 OR 2 LED IN ONE ROW

[kostasgreen]

great idea, but Can i use a DS1302 RTC in this project and DHT11 module for humidity ?
can you send me the code for 30 led and 24 hr clock if it is possible ?
THANK YOU in advance for your answer.

[divyeshkumar]

But the code of 114 led is working but i want to make 30 led clock so wat to do plz help

[esminesmin]

hy...greate project ...im new in arduino led projects...i find interesting your circuit:D but need 24 hour code if you are able to shere i be gratefull...and one thing clock color cand be change at hour like the gong of mecanical clock

[tomalchowdhury]

Great work ... But how can i change color pallets

[sukh]

Hello sister if you have time please make 6 digits clock 128 Led or if you have code please share with me .thanks

[bazrazin]

getting this for both 112 & 30 leds, 'RTC' was not declared in this scope for the line "RTC.read(Now)";