HVAC: Blower Motor Pulley Removal (Fixed Bore Variable Pitch V-Belt Pulley) HVAC Sheave Puller Tool

How to remove a HVAC blower motor pulley with a pulley puller tool/sheave puller tool for any air conditioner system! Fixed bore variable pitch v belt pulley removal for AC Unit.

ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in

Fan Blade/Wheel Puller

DEWALT Angle Grinder Tool, 4-1/2-Inch, 11-Amp (DWE402)

Klein Tools JTH610E T Handle Hex Key Set (SAE)

Klein Tools JTH68MB Hex Key Kit (METRIC)

Milwaukee Cut 1 Dipped GLOVES L

Veto Pro Pac Tech XL Tool Bag

Thanks for watching!
Follow me on Instagram! @JumpRmantech

[dbfbobt]

Looks like one of those 20 minute jobs that winds up taking all afternoon.

[yeliab]

Appreciate the candid video - happens to us all! I’ve taken these off before and some additional tips that helped:

-leave the front allen screw alone so as to avoid changing pitch, loosen only the rear
-heat around the pulley to expand it slightly, using a heat gun or propane torch
-slide a short iron pipe over the shaft protrusion to tap on the pulley hub using a hammer or brass mallet. this breaks the pulley free from the shaft by first sliding it backwards slightly.

Short Impact impulses are almost always a safer way of freeing something versus a large static force (aka the puller).

[anzeusnarine]

You are one of the best technicians out there thanks for all the videos brother🙏

[regiaguilarjr]

you suppose to take out that metal wedge first. that’s why you were not able to slide it off pretty sure you figured it out after the fact .. good video

[izzybell]

Helpful and interesting video indeed. Great job
JMT.

[isonlynameleft]

Great video. I'm glad you showed the way it really is sometimes 😅 Just did almost exactly the same job yesterday but got lucky though no rust came right off without needing the puller.

[johnmalady]

Thanks for this video! Thankfully mine came right apart!

[stevejuststuff]

Put a nut on the end of the shaft and put your puller into the nut. Helps keep it from getting off center or falling off. Good video

[davidl]

Get yourself a blunt drill bit, spray the pulley with penetration fluid(WD40 is not that great) and then start to drill the end of the shaft until it gets hot or you see smoke. This should help to unseize the pulley. Also when using that type of pulley best to use a brace between the claws and pulley. i.e flat piece of wood. Keep the videos coming :)

[ChrisLovato-ttio]

Awesome, couldn't have seen a better video!!! THANK YOU...

[hottbooty]

Omg thank you! I learned all of this from you and I'm a female. Haha the other side of my pulley broke completely so I clamped on to a different part and it came off! Thank you!!!!❤❤

[josephmonteiro]

nice work, appreciate the real world flavor to it!!!

[sunnyormsby]

yup, just what I'm going to have to do.
Thanks for the confidence😀

[genoforbes]

Wooow this just happened to me today appreciate the honesty 💯💯

[hkhsm]

nice video. sometimes need to use force and the force not going well. but end of day the job will done. thanks for sharing

[JimTMcDaniels]

ThankX for the video!

OH I RECOMMEND first heating up the Allen screws with a torch in case the maker used a lock tite glue on their threads and then also wd40 the screws before removal.

[sherwinalvarez]

Thats a fact in the real world plans dont always go according to plan. Sometimes you just have to do whatever you have to do to get the job done

[Akronkangaroo]

I Use kroil lubricant spray instead of wd40. Good video

[koonerd]

New favorite hvac channel
Digging them Milwaukee wrenches 🔧

[USA-Truck-Train-Ship-Car-lover]

Use a paint stripper and make it hot, doctor heat works always good, wd 40 not that is a teflon spray, we use "imal" rust spray let it works 1 day and spray more again in that day, you see that works better.