How To get the MOST out of your LC2i PRO | Tips & Tricks | Install Setup Tuning Review

This video focuses on tips and tricks for getting the best sound possible out of your LC2i Pro or LC2i in your upgraded car audio setup. Topics discussed include Signal Wire, AccuBASS, Boost, The Maximized Light, Source Quality, Input Terminal and RCA Cables. The LC2i is a LOC (LINE Out Converter) made by audio control and this video will hopefully help anyone who has an LC2i or LC2i Pro to maximize their results with methods explained in this how to tutorial. Enjoy!

Thanks for watching and please feel free to like and subscribe if you found value in this video. I really appreciate all the positive feedback and thank you so much for your continued support. Feel free to check out any of my other videos on my channel and stay tuned for more tech related videos to come in the very near future. Thank you!

Check out my other videos here:

#techinsomnia #Lc2i #audiocontrol

DISCLAIMER
The information provided by Techlnsomnia is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.

Please read this disclaimer carefully before using this YouTube Channel operated by TechInsomnia. All information posted is merely for educational and informational purposes. It is not intended as a substitute for professional advice. Should you decide to act upon any information on this website, you do so at your own risk. While the information on this website has been verified to the best of our abilities, we cannot guarantee that there are no mistakes or errors. We reserve the right to change this policy at any given time, of which you will be promptly updated. If you want to make sure that you are up to date with the latest changes, we advise you to frequently visit this page.

[adial]

Emmanuel. Thank you for this video. I'm currently running a LC2i and have been for a while. I want to upgrade to the PRO. I appreciate all the information you gave on this video. It's awesome and you are right about the feeling you get when your system sounds good in the car. It really makes me want to be in my car more and more. The drives to and from work are one of my most favorite times of the day. Thanks for the information and love your delivery. Easy going and easy to understand. Thank you Sir.

[doro]

I use the lc2i pro with great results highly recommended 👌

[kylebainter]

Got everything hooked up last night, so after work I'm going to play a bit with it. I do have a DD1+ so I'm gonna work the pro with the accubass, threshold, etc. To hopefully maximize its potential. Without touching anything there's an ok sound coming but I know it's now time to tune.

[svitroful]

Its great to see nice clean and clear review, thanks.
What year is your Lexus No M/L and which colors did you tap into to get the sub signal to the LC2i?

[danielallison]

I have a 2017 chrysler 300 S with 2 memphis mojo 2 ohm 12's with a db drive 1000.1 mono amp and i use the LC2I PRO LOC. When you use the LC2I PRO you want to see what your factory unit settings need to be before setting the LC2I PRO. The manual will show you what settings to use on what car manufacturer

[beaubanz]

Show the actual unit and how to set up. This is not good just talking.

[bobbycoppinger]

Great video man… Any experience with DQ61?

[frankgv]

Hello Techinsomina, is there a way to adjust the depthness of your sub while using the LC2i? I have two JL audios 10 inch with a JL audio 750/1 amp. Factory radio from a Ram 1500 12 inch screen. but i've notice my sub sounds a little too punchie and not too much depth or humpth if that's even a word lol.

[TimSmith-dbiu]

How did you power yours? I know it's a 12v constant, but what exactly did you connect yours to? And what gauge wire? Did you use a 1A inline fuse, as recommended?

[Sirsoulja]

Would I still need a battery isolator with an Audio battery

[ericander]

I wish I understood all this. I just had LC2 installed in my Tacoma, still issues.

[kylebainter]

Also, considering a DSP for both vehicles but 1st in the daily driver to play around with. Zero experience with those. My deck in truck has all the crossovers, and all the bells and whistles. Definitely need to take top cover off by back window and trunk and gonna have to go pretty heavy on deadener too. More rattle then sound. Lemme know what ya think!

[onetofourhundred]

Some noteworthy tips, good stuff. Been running one in an 8th gen camry (JBL) and finally took the plunge to grab the front speaker signal the other night. Such a shame that JBL decided to cross the stock sub at sub-bass levels. The loss of 61hz-80hz+ was driving me mad. Nonetheless, I still haven't figured out how to tune the accubass smoothly, so I decided to keep it always on. I measured the output voltage at +10 volume above my absolute max listening volume and it measured around 3.5 volts (compensating for automatic sound levelizer). I also kept the LC2i bass knob at 50% when tuning because of the ridiculous variety of sound quality from music from the 70s to today, and the HU source qualities (SXM is the loudest). This tune has my alpine amp turned all the way DOWN and somehow it works pretty well. I'm always chasing cleaner sound, especially after taking time to custom build an enclosure, drop decent money on driver(s), and the never ending sound deadening project, so I'll have to disable accubass this weekend and see if there's room for improvement.

[kylebainter]

Hey there!! All things are good... Accept when I turn on the car there's a POP sound. Other than that all is good! Any thoughts???

[Ryeezy]

If you have an aftermarket HU you won’t need the line output converter. Right????

[pedrorubio]

I have a 2011 Toyota 4Runner. I disconnected the factory subwoofer(jbl) and ran the wires straight to the lc21. It sounds good but I’ve noticed it doesn’t hit some continuous low notes on some songs.

[PuresDen]

Do you have a link for the monster cable RCA's?

[jamesswain]

I have a Subaru WRX STI. I want to install a mono amp off the sub. And a 4 channel amp. I don't need fading or left and right. Can I do that

[lethaldose]

Is there a reason why my lc2i pro doesnt read voltage anymore it was fine but recently when i tried to re tune with multimeter it says 0 voltage when turning the knobs?

[Ryeezy]

Hi! New subscriber and I was wondering if you have any info on how I can and an amp to my gs350. Problem is the factory amp I believe controls more than just the stereo. I added a amp for subs but I want to add an amp for my highs.
Thanks in advance