Mini Locomotive | Assemble me. Get on the adventure express!

The Mini Locomotive from new SMART collection by Ugears is a rubber band-powered wooden train (locomotive plus tender) model that can travel over 2m on a single winding.

The locomotive features a wind-up ratchet key, "Start/Stop" switch for easy operation, and three main paired wheels with connecting rods, to send the train speeding away along any flat surface. To operate your DIY mechanical wooden train model, set the On/Off switch on the top front of the train to the "Off" position, give 6-7 turns of the ratchet dial on the side of the locomotive, place your train on the floor or on a table while holding it with your hand, then flip the switch to "On" and release. Rotational power is transmitted to the wheels through a gear block, while a flywheel slows and evens the acceleration of the train.

The train's rubber band motor can be wound again and again, and if you ever need to replace the rubber bands this can be done easily by spooling out the line to which they are attached, using the ratchet key.

The locomotive couples with an open coal tender that can be used to carry a favorite toy, snack or note to a loved one across the room!


#ugears #3dpuzzle #locomotive

[hal-dfnk]

I'm surprised to see you modelled it after the mighty mercury! It makes me want to see the rest of the NYC streamliners!

[PB]

... the music is she wants me dead? xD