10 RENOVATION MISTAKES not DONE BY ME

Показать описание

Personally I really enjoy renovation tips shared by Singaporeans as they are way more advanced with high rise living. And I really learnt a lot from this episode.

See you guys on the next one:)

Рекомендации по теме

Комментарии

4:27 vibration is just a minor reason for the cracks, major of it is the coefficients of thermal expansion of different materials differ a lot ( especially wood material expands a lot ), also the humidity. That’s why nowadays, the installation of the modern timber flooring always leave a tiny gap at the very end.
Anyway, thanks for all the tips. Looking forward for more this kind of videos.

Ninochew

Whenever possible, just mount the aircon unit on the wall facing the exterior (e.g. above or near the window) of the building so you don't need any interior wall piping because you can connect directly outside through the wall. This works for most bedrooms.

GodOfTetris

4:14 Hi, iherng, appreciate your videos and i learn a lot from you and others that from you, I’m a wallpaper specialist, that hair crack can just use board to cover up the wall, wallpaper cannot cover the defect, it will cause an air crack which will appears to be seen on wallpaper surface. Which will also makes us feel uncomfortable to look at it hahaha. Not recommended.

TheNico

Try laminating the whole wall where the joint/crack is. Double-sided tape allowing some movement could be used as the bond to the wall

wchane

i do agree... those smart things sometimes not as smart as it should be.. In the end the "old grandfather's" way will still be the most effective way..

SkyVergil

The bed side lamp. We did consider about that but in view of the hassle we might shift the bed if we have kids so we forego that option. Supposed it is like the foreseeable issue at the dining table. Gotta be where is has to be without the freedom to shift around the furnitures. But we did do the dining table feature lamp. Awesome decision to add finesse to it. For the bedroom, one cheap
Option is to change the lamp to those with controllers, then yup it’s fixed without the hacking and wiring for 2 gang 2 ways :)

glutzoid