Chase Bays Dual Piston Brake Booster Delete Info & Install Guide

This video covers the installation, key features, and bench bleeding of The Chase Bays Dual Piston Brake Booster Delete with Bolt-On 6:1 Pedal Ratio. A FD, FIA, WRC, and NASA approved Manual Brake Conversion. There will be another video explaining Manual Brakes IN DEPTH and how our setup is great.

Chase Bays Dual Piston Brake Booster Delete with Bolt-On 6:1 Pedal Ratio

Chase Bays Brake Line Relocation for Dual Piston Brake Booster Delete

Make sure to follow us on Instagram @chasebays and like our page on Facebook.

[bryanreyes]

So this could technically go on any vehicle with slight modification to the fore wall and maybe the bracket to connect to the brake pedal? Even trucks I'm assuming as well?

[Gunnl]

if i get this and wish to install stainless steel hard lines, what size hardlines should i get ?

[Mr.GS-]

They look amazing and I would run it in my car, I just don’t know how they feel compared to the oem brake pedal feel

[AdinSLaboy]

Wow love it I want to try that set up In a tercel 95

[stheron]

so i have this kit installed followed this video to a tee, but even after adjusting the bias i have it to where the car will brake but its significantly harder to do so. not like it claims on the website. what are some things i can do to make it easier

[ChrisBeenRaw]

How do I disable the brake light on my dash on gs300 after install?

[xadada]

What do you use to plug the vacuum line that goes to the OEM brake booster?

[nofacebuild]

Amazing work! Love your products! Love the detail and brake down of the product

[KiG]

Hey does any of these kits have a 80mm wide x 60mm tall bolt pattern to the firewall? I have a suzuki with a 80x60mm booster bolt pattern and would like to use one of these kits

[Seducier]

I was surprised to see the price on this unit 😬 definitely cool though, I want one. Will have to work my way up to it.

[MJ-lsnb]

Does this work on a right hand drive Lexus IS 200 ?

[BuiltToBoost]

Hey I was looking for a video on the clutch line for the s14 with Nissan transmission for line routing. It seems like the the line is to short? Can you shed some light on the routing? Stock slave cylinder

[bizzysmiley]

does the e36 m3 setup any different modification needed?

[weslier]

Do you guys make a kit for my 92 VW Corrado SLC my ABS is going out. I hope so might have to do some mods but looks promising for what i need.

[davidlvann]

Will the reservoir clear the plastic panel above the rear of the engine bay on a G35? The panel that keeps leaves out if the engine bay and A/C inlet. This looks a lot closer to the firewall (has to be, no booster in the way) so it's a question of how tall it sits.

Unrelated but is there a reason this was designed to require clearance instead of centering the master cylinder on the existing hole?

I'm also curious if this could be a drop in replacement for the OEM setup - as in use the OEM lines to the OEM ABS block (or some minor adaptation there of). It seems like it would work but I must be missing something.

[josuemedina]

99 EK9, I plan on upgrading to dual piston calipers in the future, can I run this kit with single pistons for now?

[Level_Up_Nation]

those front brake lines used, would they work on a K24 swapped RX8? length wise.

[unclassifiedjz]

You gotta make a cabin relocation for the bias valve for an s14!! Asap!!! I know the single piston does but we need this for the dual!!

[martymcsupafly]

For anyone watching this that can't get the air out of the system: When I bench bled the master, I reinstalled on the car with the fluid still in it, removed the bleed lines and reinstalled the brake lines super fast so as not to let the cylinder run dry, bled the system and was able to get a good pedal. When emptying the master before reinstalling, I wasn't able to get a decent pedal after running a few liters of fluid through the system no matter which method i tried.

[freddiezack]

Should've included a paper template so people don't have to disassemble it just to make a mark lol