The Simple Electronics Podcast - 102 - The List

Welcome to another solo episode of The Simple Electronics Podcast!

This episode is brought to you by PCBWay! get 5 PCBs (or more) for 5$ USD plus S/H

Here are the links to the products:

1 - FG-100 Soldering Iron Temperature Tester:

2 - Xiaomi Mija Wiha 24 in 1 Precision Screw Driver Kit

3 - Set Of 2 IC Chip Extractors

4 - PCB Helping Hands (Best Version In My Opinion)

5 - Soldering Iron Tip Cleaner

6 - RP2040 Pico Microcontroller

7 - BT-168 Battery Tester

8 - USB-PD Trigger

9 - 10mm LEDs

10 - DT3 USB Cable Tester

Check out Another Maker's Videos On The Cable Tester:

Thanks for watching!

If you feel like supporting the channel, please consider supporting on Patreon:

or get some cool merch!

or buy anything from USA Amazon using my affiliate link:

or buy anything from Canadian Amazon using my affiliate link:

or buy anything on Banggood's site using my affiliate link:

or buy anything using my Aliexpress affiliate link:

and if you feel so inclined, here is my Amazon wish list!

I have other channels!:

SE-Made-A-Stream:

Dan Fixes Cars:

SE Con Dairy:

Live Gaming:

Disclaimer: Some links included in this description are affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!

[jerril]

That was fun, I don't mind the podcast presentation, it's always good to have something to listen to while doing other things. I did get a few things: the battey tester II've wanted one for a while. The Picos, I have a few of the RPI boards but I like the smaller footprint for smaller projects and they are good for learning when you don't need a lot of pins. And the 10 mm LEDs, again something I've wanted for a while, I have some 8mm, but now I'll have more variety (way too many varieties now). A couple of things sit unchecked in my cart.

I agree with the brass (metal) for cleaning soldering tips, I tried sponges when I first started (because all the experienced YouTubers swore by them) and found them frustrating . Once I got a brass ball, I never looked back.

[frankowalker]

UNI-T put you on the naughty seat. LOL.

I liked the format of this one.

[frankowalker]

3) I just use a small flat blade screwdriver. Gently pry the chip upwards slowly alternating each side.

[frankowalker]

5) I love the brass ball iron tip cleaner.

[uni-byte]

For the iron cleaner I'd go with the dome type as this one will tend to toss little bits of solder and slag around. Also, these low cost ones tend to not include copper, it's copper plated steel.

[MkmeOrg]

My soldering temp: Turn that dial to 11 and control heat with contact :)

[frankowalker]

Great list.

You could add those cheap wire cutters with the blue handles, heatshrink tubing selection. I find having a selection of M screws in various sizes with washers, nuts and stand offs very useful. Multimeter leads with small croc clips. Magnifying glass.

(I'll stop there.Sorry Dan.)

[frankowalker]

8) I don't have any USB chargers or power banks. I only have 2 things that charge off USB. But I use the laptop to charge them.

[frankowalker]

I've got a Soldering Iron Temperature Tester, I use it about once every 6 months and my iron never deviates from it's setting on the temp display.

[frankowalker]

4) I've looked at these, but I don't think I could get a mtherboard from an 8 bit machine in one. LOL.

[frankowalker]

6) I've gone off programing the C++ Arduino software. So I've stopped using any of these types of controllers. I've gone back to using logic IC's.

[frankowalker]

7) I still use a version of this I got in the 1980's. LOL

[frankowalker]

9) I have SO many LED's. LOL. (No 10mm though)

[frankowalker]

10) No good to me. I only use USB 1.1 and USB 2 memory sticks. Nothing high speed at all.

[noanyobiseniss]

So your saying cheap chinese junk is not calibrated ???
Next your going to want me to believe they don't do QC!