ZTE Axon 7 Battery Replacement

Wanna fix your ZTE Axon 7 bad/stuck/inconsistant battery life?
Your ZTE Axon 7 battery easily drains? Here’s the video showing how to change the battery with a new replacement original ZTE.

If you have any question about how to change the battery or any question about any repair of Axon 7 ,please leave your comment above and we ll be glad to answer it and don t worry if you need any help, our support team is here :) so,if you want to contact us you can do it, by the form contact on our web site or by the phone: [phone]

[JonG-BVBIAGP]

I have a ZTE Axon 7 mini, so the guts were a little bit different, but this video was good enough to get the job done. Saved me the hassle and money of buying a new phone. The battery I bought came with a little toolkit that was all I needed. Thx.

[falconidaes]

1. The black glue from top and button can be cleaned from the thin mesh material (not visible on the video/left glued). The are 2 parts of the thin mesh where the front camera is located. I used B7000 Industrial Glue Adhesive 15ml for Mobile Repair. Found on eBay. Not the same since it is transparent but did the job. At the end I applied it around to glue the thin material to the plastic covers except the place where the holes for speakers are located. Then I glued the edges on the phone and pressure plastic covers to the phone.
2. It is hard to remove the back cover. I pressure the back of the USB connector with thin screwdriver enough to lift the electronics from the back cover. Then i used thin plastic tool to disassemble it completely.
3. Don't destroy the display ribbon cable located below the battery. Start from the right side where most of the glue is located.
4. Also I used B7000 to glue the battery to the phone.

[joelsvideostuff]

Thank you for the step-by-step video. I was able to replace my battery for $15 with a kit from Amazon which included some tools. The local repair shop wanted $135.

[NiyaKouya]

Thanks for the video! After ~3 years of usage the battery of my Axon 7 was crapping out at about 20% capacity left (according to Android). Replacement definitely isn't easy but doable.
Got a new battery (original ZTE part), tools and B-7000 glue off of ebay for ~30€ total, hopefully that will be well-invested money to keep it running for another 2-3 years.

[joegillie]

Thank You! While I've moved on to a new phone....my Axon 7 is still serving me multiple purposes and has been a good device despite ZTE not updating (not happy with ZTE over this!) You video is good and understandable. Using the computer voice is the best way to go. I understand you are in Spain and others' around the world may not understand a Spanish accent on some words that are not often used. The computer generated voice can be understood through any translation programs. So....those who are whining about the voice on the video are just being drama queens...

[_AVG]

My Axon has been running for 5 years now and still has 50% battery left. But I got tired of suffering and I decided to change the battery. Thank you very much for the useful video, and the viewers for the useful comments and advice!🤝🙏

[stanphilosophy]

thank you so much for the clear and obvious explanation instructions. I could repair our favo phone just a few hours ago. You made my day happy

[pungolay]

I was seriously going to buy another phone because of the ZTE Axon 7's battery. But since I found this video, looks like I won't be buying another phone for years. Thank you so much!

[africa.fs.]

I'd like to thank you very much for your video.

Without it, I would never have had the skill, confidence and critical info needed to finally fix the year long battery issue with my phone.

Finally replaced the battery 5 days ago, followed your step by step work, BUT based on advice from a couple of comments here, , I removed the old battery from the other side of your video, I didn't use any liquid dissolver like you did in the video... just a plastic pick and push up hard on the old battery.

I also used the B700 glue to to glue the new battery to the spot the old battery came out of...old glue from old battery was still strong enough to hold the new battery in place but I added some B700 to it to make it stronger.
I put everything back together and it was perfect.

Just wanted to hint that it is way much easier to stick a flat thin steel tool to release the phone back cover from the charging port thin area than on the left or right side of the phone or from the wasted almost an hour without success trying to release the back cover from the left or right or top side of the phone, until I realized you could stick the flat thin steel tool between the thin back cover over the charging port and the phone.

[geotrano]

This phone is amazing. I would never attempt this myself. His voice reminds me of Hal IN 2001 space oddessy. "Dave I'm Afraid"
Great info.

[hemal]

Thank you for making Tutorial, it's clear out and helped me to move forward to replace battery on my own.

[svetlozardzhambov]

it was easier than I expected Thanks for the video

[ChatGPT-kz]

вот почему англоязычный ютуб такой крутой 😁 👍 спасибо всё просто и понятно, звук класс

[eastlane]

Does it work with the ZTE Axon 9 pro as well? Where can I get the appropriate Accu? Thank you for your answer!

[MrMikeyx]

Well I just did my phone repair and it was a little hairy at times because if you do those connectors wrong you'll bend them and then it won't connect and basically it won't be any good any hour clue I got from this video of buying a good battery Note the 3M sticky stuff on the back where when you're buying a battery there's a lot of them out there I got mine off of eBay but yeah I look for the 3M backing like you see in the video

[MrR]

So I have wanted to replace my Axon 7 battery for a long time... but I'm having a hard time finding a suitable replacement battery. Do you know of a good place to purchase a battery for this phone?

[HenryEIje]

Hello, will the (Axon 7 mini) battery work in (Axon 7)?

[MyExpatDiary]

Now after I replaced the battery my display is only showing the left half. The right half shows pixels like on a static tube television. What could be the issue?

[j_inc.]

Didn't mind the computer voice tutorial at all here! Thank you for the video. My replacement was a success! Although any recommendations on how to make sure the speaker grills are secure. Mine seem secure enough but they are protruding out a bit after trying to squeeze them tightly back on.

[zhaohuihuang]

Really nice video. Exactly what I am looking for. But will you please specify industrial glue in more detaill? what is that brand?