filmov
tv
CReeves Makes The DIY Pallet Wood Wall ep007

Показать описание
As I keep growing and going, I will develop and add more plans to the site! Please comment or contact me and let me know what plans you want to see next! Thank you to everyone for the support! Without you and this community, I wouldn't be able to host and put up this content the way that I do. I hope to make this a more common occurrence in 2019! Thanks!
Hello everyone,
Our master bedroom was in desperate need of an overhaul. The main wall had a large mural (of Wrigley Field) on it at one point and the bank, that was selling the house, had the painters paint OVER it. The seams were bad and the paint had run and drip marks everywhere. I made the comment to my wife, that we should just put pallet wood over it. Let the project begin!
So, here we are. We prepped all the walls and installed 4) LED 3" can lights with a dimmer switch. Word of mouth, and perfect timing, allowed for me to acquire more than 30 pallets to dismantle. I planed all of the boards and ripped them on the table saw to provide clean edges for uniformity in most of the rows. For the light switch cover, I cut a section of the wall board out and routed the back of it out and glued magnets into it to hold it to the switch.
We chose the best looking boards for the upper section and then we stained a few random boards towards the bottom to keep the color similarity. I used brad nails and glue to attach the boards. After the install was done, we put on 3 coats of water-based poly.
Enjoy!
Tools I use every day: Help support what I do by following the links below!
======================================================
Social Life: ======================================================
Be sure to Like, Subscribe, and Follow me on the following social media platforms as well!
Music: ======================================================
"Fire Ahead" and "So Far So Close" by Jahzzar
Hello everyone,
Our master bedroom was in desperate need of an overhaul. The main wall had a large mural (of Wrigley Field) on it at one point and the bank, that was selling the house, had the painters paint OVER it. The seams were bad and the paint had run and drip marks everywhere. I made the comment to my wife, that we should just put pallet wood over it. Let the project begin!
So, here we are. We prepped all the walls and installed 4) LED 3" can lights with a dimmer switch. Word of mouth, and perfect timing, allowed for me to acquire more than 30 pallets to dismantle. I planed all of the boards and ripped them on the table saw to provide clean edges for uniformity in most of the rows. For the light switch cover, I cut a section of the wall board out and routed the back of it out and glued magnets into it to hold it to the switch.
We chose the best looking boards for the upper section and then we stained a few random boards towards the bottom to keep the color similarity. I used brad nails and glue to attach the boards. After the install was done, we put on 3 coats of water-based poly.
Enjoy!
Tools I use every day: Help support what I do by following the links below!
======================================================
Social Life: ======================================================
Be sure to Like, Subscribe, and Follow me on the following social media platforms as well!
Music: ======================================================
"Fire Ahead" and "So Far So Close" by Jahzzar
Комментарии