Rekluse Tech Tip - Adjustable Slave Cylinder for Auto Clutches

In this Rekluse Tech Tip video, we'll show you how to properly use the adjustable slave cylinder. The adjustable slave cylinder is used to adjust Free Play Gain. It can also be used to bump start the motorcycle. This applies to hydraulic actuated auto clutches only.

You can learn more about Rekluse products by visiting our website and FAQ page:

[stephenjacob]

Very helpful vid to confirm correct settings

[bogusfranz]

Didn't know I could bump start my bike - cool

[trailinsight]

great informative vid, helped me get the setup dialed

[jaimitto]

Great info! Would it be bad to ride with the "manual override" to bump start the bike as you will do with a regular clutch?

[xxshiftlockxx]

So if on a hydraulic clutch, while in gear at idle if it's pulling forward and the freeplay gain is set properly, you're saying don't adjust the slave cylinder, rather open up the clutch and replace the springs?

[valtteri]

My clutch cylinder slave is leaking a ton of oil any tips on that the part is fine but just spits out oil

[LuckyNikitaBoba]

What is the procedure to bump start a bike with cable operated clutch?

[mvcg-clcr]

So if turning in takes away freeplay gain then why wouldnt you turn it in to bump start the bike?

[escapeorion]

Bike in neutral and at idle the bike rolls backwards 22 husky 501 for reference

[dill]

I don’t have this adjustable clutch cylinder

[joeyb]

At no point did I see how to properly adjust the slave cylinder. Lots of what it's not used for and how it should act when it's properly adjusted but nothing about how to adjust it. I managed to figure it out on my own after a lot of experimenting

[apostateapostate]

Still have no clue what free play gain is