You Could Be Leaving HorsePower On The Table!

#FOXBODY #PROJECT #FREEHP
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇

[jaywhy]

My fox has a set of canfield 195s, the car felt sluggish.. so i checked the plugs and the previous owner had installed factory sparkplug.. what a difference once I switch them out

[shaggyleeman]

Hey bro love your channel! Have you ever heard of the rock/adjust method to adjust valves? It’s the simplest, quickest and most accurate way to adjust your valves. I’m sure Neo will know if you haven’t. Check into it 👍

[RollingRigTraction]

.040-.044 is the norm for so many cars anymore. Of course if you run anything platinum they're set from the factory and re-gapping them is just a no go and guaranteed to destroy the plug immediately. If they're platinum or Iridium I won't touch the gap set from the factory ever.

[FishingWithJo]

Man the advice you and neo be giving us is priceless, a lot of just got our selfs to be figuring things out but you guys help us out alot. Got to love the FOXBODY Community!!

[marksavastano]

I drive a 98gt conv the idle stays up and rpms sort of hang if I rev it up. I could send it to you I'd love that come back brand new I fixed a couple things watching you the best you are you know your mustang any car probably. Strong. respect for you

[dukesidone]

I'm gapping my boosted car at 50 thousandths that's what the crame cams hi 6 ignition and edelbrock recommended and not a bit of problems.

[j-port]

made the same mistake on my canfield 192's.

[savrem]

This makes me want to get back to work on my fox but it’s still stuck at the body guys place

[NoFox_Given]

Something that just clicked in my head… this car has Canfield 192’s right? That’s what my car has and they call for a Gasket seat spark plug not taper seat.

[TheJoefussGarage]

Absolutely love the "Remedial" Fix Body math lessons you guys bring, on a regular basis 😉..!
I lived thru the Fox period, though the closest I got, was low milage, 81 Thunder bird, with a 255.
I swapped a 90 5.0 GT Motor, factory headers and cat H pipe, with an Edlebrock Performer and carb..
And low mile 8.8 w/3.73 gears.. Good times !
Thanks for pointers on plugs, though especially the possibility of to tight valve lash.. I did springs and valve seals, on my 90 non HO 302 truck motor, and can't even remember the instructions I was using to set those valves I do tend to "pop" a bit.. I'll be checking shortly brother.!!! Thanks 🙏 ...

[therealstang]

I tried a cold air intake on my fox. Wasn't pleased and dropped my stock airbox in with a K&N air filter.

[jonpierce]

Correct me if I'm wrong but aftermarket aluminum heads need spark plugs with the washer instead of tapered seat. The taper will actually damage the first thread. Check out some NGK FR5 stock number 7373. You're welcome

[allenjay]

Awesome, I just got a new project fox.
91 hatch 5.0/AOD . Fresh 306 that is knocking
I’m going to fix it and drive it . The kid that owned it got super discouraged and gave up .
I got it and looked it over, cars not been wrecked, wording is not butchered, a/c, heat is all there . I’ll swap it over to 5 lug and party on.

[Scrapla]

I had the same incorrect plugs in my Performer RPM aluminum heads this whole time and even when I had it tuned nobody noticed, thanks for the video!

[kennethkieffaber]

Paint that thing black with the red molding stripe and turbines like the 87 gt on the ford commercial. With that red interior 👌

[SuperThugnifacent]

Yall see that flickering light hahaha that tripped me out for a sec haha

[cloucks]

Always a pleasure watching you guys do your thing! Almost done with my seat recovering and then back together for more cruises!

[Funky.]

These videos are always great.. thank u...I have to check my valves now.. but im in NY and I only have a driveway...its 17 degrees

[therealfoxbodyaddicts]

These are the style videos that have taught me and continue to teach me so much! Thanks as always!

[marOcean]

@BREW2L
I just bought a 88 fox body GT 5.0 it does feel sluggish I’ll change the plugs but it also shakes above 45 MPH and even a lil more around 65 or when I get on the gas at take off what could that be caused by . Love the vids thanks 🤙🏼🦊