filmov
tv
Waypoints II - OFF-SITE Setup of a Waypoint Mission
Показать описание
This is Part II in our series on Waypoints for the DJI Mavic 3 series of drones (not the Enterprise). Waypoints is a favorite feature of ours and was released to the Mavic 3, Mavic 3 Cine and Mavic 3 Classic in December of 2022.
In Part II, we cover Setting up a Waypoint Mission Off-Site. This method uses the maps to set each Waypoint and Point of Interest (POI). We then show how to edit the Waypoints and POIs. Here we also go into some detail on all of the settings that are available to set. Next we show the Global Settings for the Mission. Finally we demonstrate how to Save and Load the Waypoint Mission.
Table of Contents:
00:00 Introduction
00:50 Series Overview
01:43 Setting Up the Waypoints and Points of Interest
06:42 Editing Waypoints and Points of Interest
06:49 Changing a Waypoint Position
07:29 Camera Actions
07:52 Waypoint Altitude
08:13 Waypoint Speed
08:44 Waypoint Heading
09:05 Gimbal Tilt
09:26 Camera Zoom
09:44 Waypoint Hover
09:56 Mission Settings
10:06 Global Speed
10:19 End of Flight
10:29 Loss of Signal
10:41 Start Point
10:56 Saving and Loading Waypoint Missions
All screenshots were taken on the RC Pro connected to a Mavic 3 Cine. We also tested it on an RC-N1 Controller connected to the Mavic 3 Cine.
*Products Used by Middleloop during flight:
Links to other relative videos:
*Products used in creating this video:
Apple MacBook Pro 16-inch, M1 Max 10 core, 64 GB ram, 2TB SSD
======
[ Updates ]
======
This version of Waypoints is compatible with the Mavic 3, Mavic 3 Cine and Mavic 3 Classic
Complete listing of products used by Middleloop to produce videos like this*:
* PRIVACY POLICY & FULL DISCLOSURE:
Thank you for participating. We Do NOT collect, store, use, or share any data from or about you during your participation with affiliate links.
Music:
Yah Yah by josh pan is licensed under a YouTube Audio Library License.
In Part II, we cover Setting up a Waypoint Mission Off-Site. This method uses the maps to set each Waypoint and Point of Interest (POI). We then show how to edit the Waypoints and POIs. Here we also go into some detail on all of the settings that are available to set. Next we show the Global Settings for the Mission. Finally we demonstrate how to Save and Load the Waypoint Mission.
Table of Contents:
00:00 Introduction
00:50 Series Overview
01:43 Setting Up the Waypoints and Points of Interest
06:42 Editing Waypoints and Points of Interest
06:49 Changing a Waypoint Position
07:29 Camera Actions
07:52 Waypoint Altitude
08:13 Waypoint Speed
08:44 Waypoint Heading
09:05 Gimbal Tilt
09:26 Camera Zoom
09:44 Waypoint Hover
09:56 Mission Settings
10:06 Global Speed
10:19 End of Flight
10:29 Loss of Signal
10:41 Start Point
10:56 Saving and Loading Waypoint Missions
All screenshots were taken on the RC Pro connected to a Mavic 3 Cine. We also tested it on an RC-N1 Controller connected to the Mavic 3 Cine.
*Products Used by Middleloop during flight:
Links to other relative videos:
*Products used in creating this video:
Apple MacBook Pro 16-inch, M1 Max 10 core, 64 GB ram, 2TB SSD
======
[ Updates ]
======
This version of Waypoints is compatible with the Mavic 3, Mavic 3 Cine and Mavic 3 Classic
Complete listing of products used by Middleloop to produce videos like this*:
* PRIVACY POLICY & FULL DISCLOSURE:
Thank you for participating. We Do NOT collect, store, use, or share any data from or about you during your participation with affiliate links.
Music:
Yah Yah by josh pan is licensed under a YouTube Audio Library License.
Комментарии