Flying the invisible 360 drone (footage) Insta360 ONE R Aerial Edition.

Insta360 ONE R part 2 of 2 | How to set up the new Insta360 one R aerial edition on a drone. Testing out both aerial edition and twin edition 360 cams on location. Flying a Mavic 2 with a 360 system for fully immersive video and photos. Colin Smith gets his hands on this new 360 gear and attaches it to his drone, join him on this journey of discovery and creativity.

#Insta360 #oneR #drone #review

[photoshopcafe]

Some additional details I forgot to add to the video: When using this mount, you will need to switch to attitude mode as the electronics interfere with GPS, you don't want the signal on and off randomly, just turn it off. I was flying in att mode the entire time with downward sensors off. An experienced pilot should be comfortable flying in ATT mode, if you don't have experience in att, then practice first (a lot) before using the mount. You will also need to hand catch the drone to avoid damaging the downward camera. You can take off from the ground as long as you put something under the lens to protect it (I used a lens guard, it wasn't attached, just on the ground to protect on launch) however, the shipping version of this will come with lens guards. The weight of the cage is very minimum, the battery and processing unit are the heaviest parts of the rig. I found the drone was very well balanced and didn't have any difficulty flying it, however I also have lots of experience flying without GPS. If you have never flown without GPS before, don't strap on the mount and fly, climb to a safe altitude above all obstacles, turn your controller into att mode and practice, you will notice more drift, but while moving, the main difference you will notice is that there is no braking, get used to manually braking, and making micro adjustments while hovering in position before flying with the 360 rig.Also the software removes the props, so there is no sign of the drone in the footage at all, I didn't notice any prop shadow either.

[jonathandear]

good video, a couple of things i might add: The lenses both have top and bottom marked on them on the back of the units to save you needing to sharpie / differentiate. Also tyou can fold the drone's bottom legs up into the chassis so you don't necessarily need a lens protector when you set it down.


Now if they could have added some vibration mounts to top and bottom to help with the jello / rolling shutter / drone vibration hard mount it would be almost a perfect system, saves editing out the drone when its underslung solo.

[CHITUS]

Great work my friend! Thx for sharing..

[YouMotorcycle]

Hey Colin, might want to add a card linking to part 1 of the video, or a link to it in the description box. Going to search around your channel and hopefullyi can find it

[SensorDelay]

I would love something like this for my FPV quads.

[georgeaura]

You dont have to know which cam is up or down cuz in post you can choose whichever one to be up or down

[southcoastpix]

Hi Colin, can you set it up to take pictures every minute or so?

[BuddBieber]

Does it block the GPS signal of the Mavic 2 Pro?

[hqcariello]

Awesome, Colin! I got the bundle for the Mavic 1, because a few folks, including Insta360 site states interference with the Mavic2Pro’s GPS. No issues or tips to report on this from your experience?

[ChrisduPlessisPhotosofAfrica]

Any tips to remove the jello effects on the stitching lines ? using the Aerial Add-On For Mavic 2, or should I wait for a firmware update ? All what I can think off is shoot in low shutter speed or to have a ND filter which is not available for the setup.

[IsraelSuperguide]

I was hoping you will actually show the video you capture from the area but they were all flat and no in 360. how long is the camera can record and when will it be available for purchase? thanks

[delmarvaaerialphotography]

Amazing!
I would be in heaven testing one of these. I fly every day and just got a gopro max and insta360 twin and have quite the jerry rig to make sure they stay with the drone

[lidodd]

I hope they’re going to release the 3D 180 mount.

[YOJIMMIE]

do you have any suggestions to find more info on where to fly drones without hassle here in OC, When I call around no one really knows what is going on. thanks

[OrangeStudios]

Dumb question, aside from using the kit with the drone have you tried strapping it around anything else like your head or a helmet? Thanks!

[georgeaura]

Is the 360 camera specific to the drone the only one that can be pulled apart or is the 360 camera in general able to be pulled apart?

[Diamond-nsqo]

Great work. Thanks for putting that together.

[davidalanmedia]

I was looking for a good review on this and hadn’t found it till I saw this one. Thanks Collin!

[fernandosantospty]

Thank you for the video! I have a question: is not possible to use the Insta360 stabilization during the flight? Thanks!

[redmiley]

Is it available cage insta 360 one R for mavic mini sir?