Is the FLSUN Super Racer WORTH it in 2023?!?!

Discover if the FLSUN Super Racer Delta 3D Printer remains an impressive value in 2023! In this 12-minute video, we thoroughly review its features, performance, and compare it to other printers on the market. With a staggering print speed of 200 mm/s, we showcase its capabilities and discuss its print quality. Join us as we evaluate its affordability and help you decide if it's the right choice for your 3D printing needs. Don't miss out on this comprehensive review - watch now!

Tested Files:

#flsun #3dprinting #3dprinter

0:00 Introduction and Printer Build
2:36 Thank You
3:06 Specs and Details
5:56 User Interface
7:02 Printing Results

[flsundprinter]

Thank you, my friend, for using our printers and for endorsing them. I will say, however, that the print will be better if you clean the PEI. A wipe with alcohol will do the trick. I hope this will give you a better experience.

[tHaHxr]

I owned this printer for quite some time before my current printer (X1C). Still miss it sometimes, watching the delta movement is mesmerizing, and it was incredibly quiet. The only noticeable noise was retraction noises from the stepper. You can literally have it next to you on your desk and you wouldn't be bothered by it. Can't say the same about the X1C.
Once a filament is set up, it is literally set and forget. Can't say I have had similar problems to you regarding quality. Very reliable, I personally did not have a single issue with this printer over its life.

One has to keep in mind when this printer was released. During that time there were many small innovations that weren't that common yet, yet this printer had almost all of them. Autoleveling, silent stepper drivers, almost automatic procedure for printing etc. At the time when it was released, 'modern' core XY machines weren't that common, so it did offer a substantial upgrade over traditional Cartesian designs. I could print designs roughly 2x faster than before. Similarly, when it came out flexible build plates were not super common.
The reason why I upgraded to the X1C wasn't the speed, but the ability to print technical materials and ABS (chamber, higher temp nozzle), and also a larger build volume.

Part cooling fans are an easy upgrade, which I indeed definitely recommend.

[RAZERTAHP]

Got mine open box from micro center for 200$ basically like new condition. Out of the dozen printers I’ve bought that was by far the best purchase

[Xenoprophet]

I learned recently that having a good roller for the filament reel helped my prints out a lot for a different printer, I just bought my delta on sale and can't wait to make use of it!

[TheCraftySmith]

So this has been my first printer, I didn't want to hassle with the Ender systems. Really it's been great but have been having issues with build plate adhesion

[Samantha]

Thank I receive mine in a few days!!! Just liked and subscribed thanks so much for all the info keep bringing more? Also very new is there any really good sites for the STL files?

[JonLaRue]

Even with all of the problems my machine has had, i love it. I have needed to swap the extruder out, the bed (it cracked), and plan to swap the hotend out to a real volcano.

[MrBaskins]

love delta printers. this printer is a great pickup in 2024 for 300 bucks

[MattHoward]

Do you have a link to the part cooling duct you printed?

[chrismay]

Easy to put on Klipper and Micro Center had them for $250 a couple weeks ago. Absolute steal. Paid $1000 used for my SeeMeCNC Rostock and it was tough to get it to print as fast at not as good quality.

[jimcsnr]

For some reason they did put in the cheapest extruder money can buy. I had mine delivered 2 days ago and immediately on the first print I could see the extruder needed to be changed. I'm waiting for a OMG V2S All Metal Gears extruder to be delivered. And, yes I did purchase a pei plate from Amazon which is arriving tomorrow. Other than that a few mods and it's good to go. To be honest I had a lot less hassle setting up the Q5 directly out of the box.

[steelplasma]

One thing about the glass bed, if you let it fully cooldown to room temperature then it pops right off with little except large flat surfaces.

[alanday]

So what about the supposed off-gasing issue when trying to speed print with PTEG?

[TheBinklemNetwork]

Had such a hassle with an ender 3 v2 neo and am running about getting this printer
Edit: thinking, not running

[MikkeyFacts]

I have a couple of resin printers but i am curious to get a filament printer. I would like a silent printer as I live in an apartment and i know some of these other printers sound like jet planes.

[papucstalpgaming]

Hi! I buy one flsun and i now start the printing so i dont know a lot of things, can u send me the filaments type plz ? THX

[nrgy]

As a European, this tape measure looks wild with all these 1/4, 3/8, 1/2. We just use numbers 1 to 300cm

[The_Freddy_show]

Hey I am having a issue on the hot end pull thing one of the baring is loose it not staying

[sashanovak]

Nice vid but I this printer is more about efficiency than quality

[travisg]

You forced it to fail the caliper test by not knowing how to use calipers.

And watching you be unable to wait 2 minutes for the build plate to cool off so the pieces come off with pinky pressure, that was just strange. Are you 12 and have to have everything now now now noooow?