Twinkly Pro 1 and 2 Port WiFi Controller and App Setup - Twinkly Pro Christmas Lights

Twinkly Pro Christmas Lights are designed for commercial and high-end residential lighting programs that require lights and hardware designed for the rigors of professional lighting applications. Fortunately, Twinkly Pro is simple to set up and does not require a professional installer. Twinkly has successfully eliminated the tediousness and difficulties that RGB Christmas lights have been known for. Watch as we guide you through the setup process for Twinkly Pro 1 and 2 port WiFi controllers.

0:19 - Reset back to original factory settings
0:53 - Download the Twinkly App and connect to your local WiFi
1:09- Initiate device setup
1:37 - Setup device on local WiFi
2:48 - Setup the lights
3:08 - Check for firmware update
3:26 - Adding additional devices
3:41 - Grouping devices
4:57 - Change the controller name
5:11 - Accessing Twinkly's scheduling and brightness features
5:25 - Using Direct WiFi as an optional connection type

Christmas Designers is the leading provider of Twinkly Pro and Twinkly Home Smart RGB lighting. For a complete selection of our complete Twinkly product line, visit the links below:

[socomt]

I am So putting these on my Jeep next year.

[AdamAdryan]

Hey guys

So I’m about to make a purchase and I wanted to get the 2 port option and get 2 single runs of 250 lights and run them parallel along my gutters to get a dense 2 inches between the lights….

My question, is there some sort of mapping I would need to do because it would be difficult to capture that using an iPad or iPhone because these would wrap around the gutters of my home ?

[tonyaguilar]

My home wifi keeps saying it can't connect.. im getting frustrated. I did the exact same thing you did and no luck.. it say. " the twinkly can not be found on your local wifi network "

[joedudley]

When you put away Twinkly lights do you wrap them the same it weird that the light strand splits, plus how do you light a normal tree going to have to dig threw your YouTube page

[moogleslam]

Mine connects to my wifi, then freezes at "Looking for Twinkly devices..." like you can see at 2:40

[hammyboy]

Mine keeps flashing blue and white and won't connect at all and tried resetting I don't know what to do

[THELORDRO]

2:53 And if I have 175 leds? RGB. Strings. Gen 2. ?

[Yocker]

does gen1 work with gen2? can they be combined together?

[jeremycarlson]

I have both a 1 port and 2 port in a group for 750L total but have no option for 3D mapping? I've tried on an iPhone and 2 different ipads.