Figure 8 Install

The Figure 8 iPad kiosk mount is the perfect iPad mounting solution providing a wide variety of mounting options for the wall and/or table top.

Here are some instructions for easy installation

Tools you need:
- level
- pencil
- No.10 wall anchors
- No.2 screwdriver
- Drill
- 1/4" Drill bit
- Hex screws (included)
- Hex tool (included)
- Rubber feet (included)

Installation Steps:
1. Remove hex screws from the cover plate
2. Determine orientation for installation (use level)
3. Using your pencil mark the wall for wall anchors
4. Drill holes where you marked from previous step
5. Insert Wall anchors
6. Determine orientation of the enclosure (landscape or portrait)
7. Hand thread the 4 provided screws, then tighten down with hex tool
8. Replace the cover plate on the bottom of enclosure
9. Place iPad in enclosure

You can mount the figure 8 over a power outlet if needed:

For more information:

ArmorActive {tablet iNnovation}