Build Linux Router Using Ubuntu Server 20.04 LTS

preview_player
Показать описание
Build Linux Router Using Ubuntu Server 20.04 LTS

#LinuxRouter #UbuntuRouter #Ubuntu
Рекомендации по теме
Комментарии
Автор

Was an amazing feeling getting this to work. I have a dell laptop running Ubuntu plugged into my TP Link via eth cable. - I then used a USB-to-Ethernet to connect to my Mac directly without a switch. I started ping on the Mac watched the responses - & then rebooted my Dell-Ubuntu--Router - the ping just resumed when the laptop came back up - Ran speed-test - its just as fast as when my Mac is plugged directly into the TP-Link - WOW. I almost want to say: I cant believe it's that easy. - I feel like this tutorial is going to be my "gateway" into the world of networking :)

brentgreeff
Автор

At 4:37
add into iptables
also add -o wancardname
like
iptables -t nat -A POSTROUTING -o enp0s3 -j MASQUERADE

ITTutorials
Автор

unable to resolve DNS when UFW enabled on the Ubuntu server mine is 18.04 I have allowed the dns/53 in the ufw rules

danarj
Автор

I have 1 problem, in client I have internet connection, but en father machine ubuntu server DONT HAVE ENTERNET IN CLIENT
HELP ME PLEASE

AlexeySuzdalenko
Автор

DNS isn't working from server when forwarding the IPTABLES, any solution to this?

Ladi
Автор

Freaking life saver!!! Thabk you so much <3

CJdragonTv
Автор

Can we add tools from pfsense on ubuntu?
like listing all connected devices somewhere?

ITTutorials
Автор

Followet it and it works greate on ubuntu Server 20.04 LTS ARM64 bit vm on esxi on rpi4 :)
thank you very mutch!!!!

אסףנוב
Автор

Why you styling music from motodoradca?

ImieNazwisko-iyni
Автор

Ubuntu 18 (вроде) пробовал. Задолбался играться с обновленным форматом конфига настройки сети.

EvgenyRejnovskey
Автор

I got a static IP and connected to a linux system using PPPoe (dial up) to host a website and from there I need to extend internet to other system which is already in the network via switch. Can I create router in linux system so that other systems in the network will get internet?

rskishorekumar
Автор

what is the vm network adapter for enp0s3 and enp0s8?

asyiqmln
Автор

My DNS (system-recolved) stopped working after trying this, on Ubuntu Server 20.04 LTS

teckyify
Автор

The masquerade rule donot specify which eth interface. Is that OK?

yeliu
Автор

hello, i go test it, ok
I response good it tutorial or not...

AlexeySuzdalenko
Автор

Thank you! Could you make a similar video, where routing is from WiFi to Ethernet?
I encountered a problem when Ubuntu 20.04.1 Server prefers to look for internet connection in Ethernet, not through the WiFi

yehorpererva
Автор

can you open specific ports on your network with this setup? if yes.. how?

feinchan
Автор

Could this work on a secondary router in a home system? If so would the same gateway address be used? Or would I need to establish static routes between the two routers?

Also I will say after tinkering with OpenWRT on my raspberry pi4, you made this incredibly easy :).

perpetualmamaba
Автор

Bro, what if i dont have enpos8? And this method doesnt work for me

vladostaf
Автор

nice! but in 2020 what would be really be interesting is how to setup an IPv6+IPv4 router/gateway on a DS lite internet connection with only ONE dynamic IPv6 address, while using static IPv6+IPv4 (dhcp fixed ip)) on the LAN and a local DNS. everything using IPv6 primarily, IPv4 secondarily. since IPv6 is the present, IPv4 is the past. its really bad to hold on to it. we need solutions for the new/present trechnology, not the past.

AxelWerner