Geeetech prusa I3 X Printing Demonstration

This is the printing test of our geeetech prusa I3 X.
Geeetech Prusa I3 X is a new member of the prestigious Prusa I3 family, it was engineered to provide redefined usability, quality, performance and most important, best affordability in desktop 3D printer market.
Quick-release feed gears for faster and fluent filament feeding
Super-flat aluminum alloy print surface for better adherence
200x200x170mm printing volume, just right for you
Stainless steel rail rods, gears, bearings and connectors for smoother movement
for more information, please visit here

[christianingmarkjlsvik]

Probably the best printer for its price

[MulderXfile]

just joking. I like the looks of your printer with proper linear bearing blocks. I'm also the process of building a Prusa i3. I'm currently waiting on the printed parts from ebay.

[MovieStarter]

buen vídeo, una consulta. cuanto es el alto que puede llegar a ser la figura? gracias!!

[nathandunn]

Thanks for sharing, what 3d drawing software do you use?

[hellskitchen]

Is there a video that shows where the cables are gonna be attached to? The playlist of about 24 videos doesn't show it

[Supreme]

What is the Music I want it please.
THank you

[lqmanhkim]

can you show how to print directly through USB connection

[georgerivers]

please help. the up and down motors keep getting jammed and hum. it also goes down too far and the table it almost all the way please help.

[propm]

I am pretty happy with my Geeetech i3 printer, I am sure that it's not the best printer. But I doubt you could get any better printer for the price :) Also, I recommend people to buy a 0.5 nozzle because it makes for a much faster printing experience, much less nozzle jams due to filament quality and the parts seems to be a bit more robust, I but a 0.3 nozzle to begin with and I regret doing so. I also have a short video about my Geeetech i3 Pro printer on my channel, its not the same as this one but it is somewhat similar.

[a.s.d]

Hi, I'm really interested in purchasing this printer, but I mostly print in alumide. Is this ok? Also, what about the noise level?

[Jens]

Can anyone help me to set up the Prusa i3 M201 on a Mac?

[Taffy]

Yours looks good. I bought same Can I ask. Is it 200mm X 200mm bed by 180mm height. I can't calbriate spot on. Do u use the cura level bed ?

[emanuelrodolfo]

Hola cómo estás? Quería preguntarte tengo un problema con la prusa i3 pro b a la hora de imprimir..quiere imprimir en la posición 0..cómo puedo hacer para cambiar en el medio de la cama

[aaa]

Use a feeler gage to level your bed, it works way better.

[boowonder]

How low/down do you set the long screw on the left of the printer that pushes down on the Y limit switch?

[sethnuhn]

Just when I got into the music, it cuts out. Other than that it's a decent demonstration video. Thanks.

[Dallas-Nyberg]

I just ordered one...
I've noticed that some users use tape on the bed to keep the model in place when printing... Is that necessary? - (I noted that you didn't use tape on this demo...)

[lukeshoot]

I'm new at this and sadly I couldn't get it to print correctly... could you please specify the setting/config on the computer ( i'm using repetier) for temperature (bed or nozle), infil, skirt and brim, etc...

[anikislam]

I want to print flexible filament with this. Was wander if this is a direct drive extruder or a Bowden extruder?

[DMonic]

I am having a ton problems with my i3 X. the filament is extruding too slow for how fast the printer is going so it's just a clump sliding on the bed. I am mechanically inclined person and building this and updating the firmware ect has been a nightmare at the least and I still haven't been able to print a single small block. I have probably 48hours into this build and still nothing upset with this item