Cool Tube Visual Inspection LGT Video

* If you notice any signs of damage, defect or anything unusual, contact your building operator/maintenance department and then your local Little Green Thumbs Coordinator*
This is a video describing the steps on visually inspecting the wires and marette wire connectors of your Cool Tube light fixture. Before you begin, please ensure that the light system is de-energized, this means that everything (light fixture, ballast, fan, power surge bar, etc) must be unplugged and remain so before and throughout the entire inspection process. Also ensure that the light system is cool; if the light system has been running and you've unplugged everything, wait until the light system is cool to the touch before continuing. It is important that this visual inspection must be done with a maintenance staff personnel from your school. We also advise that this inspection be done without any children around for safety reasons. This is a video for a visual inspection ONLY, please do not touch or alter the wires and marette wire connectors of your light fixture. When you're visually inspecting the wires and marette wire connectors you're looking for any signs of wear and tear, damage, defect, cracking, melting, scorching or anything else that looks unusual. If you do notice any of these signs please keep the light system de-energized (i.e. unplugged) and contact your building operator/maintenance department and local Little Green Thumb Coordinator immediately.