Stihl pole saw sprocket repair.

Stihl HT Pole Saw sprockets and explanations of the different sprockets and there benefits and purposes.

[lesteroliveintheshop]

To learn about drive shaft repair, check out this video.

[dixiesegrin]

THANK YOU!!!! I retired from the military and came home to the family farm to help my step Mom, after my Dad passed, and now I'm trying to figure this stuff out on my own. I have an older pole saw with the 3/8" sprocket but all of the replacement chains are set up for 1/4". I was hoping that I could change out the sprocket. This helps so much!! All you need is your own tools and YouTube now days... thanks again.

[russwilkins]

Thanks for the video. I took all that off and dropped the washer pile. I needed the order in which to replace. Perfect. 👍

[themicdfiles]

I THINK YOU JUST HELPED ME OUT. HADN'T RUN THE POLE SAW IN SOME TIME, FIRED HER UP AND SHE WAS MAKING A HORRIBLE CLUNKY SOUND. PULLED THE COVER. CLEANED IT OUT SAME THING, SO I'M HEADED BACK OUT TO THEW SHOP AND HOPEFULLY I CAN GET ONE THOSE SPROCKETS OUT HERE IN WYOMING. THANKS MAN!

[devinbraun]

Thank you sir, this video was just the info I needed to get back out and trimming in no time.

[donfrank]

thanks for the info. I like to know stuff for my chainsaw, I have the 17 ft.stihl ht131, husqvarna 8 ft pole saw a little lighter then the 17 ft stihl pole saw . both saws work great if you take care of them

[jamtin]

So the sprocket screw is left hand thread, interesting. Would you recommend putting thread locking compound on the sprocket screw thread?? Hi from Australia.

[jolyonrussell]

Thanks - Can you indicate when that sprocket should be replaced? My sprocket has some very big grooves worn in from the drive links of the chain. At what point should it be replaced?

[tonijohnson]

Can I put 12" guide bar on a stihl 56c pole saw? It came with a 10" bar.

[randyc]

Is there a way to grease the heads on these pole saws?

[deanjackson]

Have you part no for this from stihl by any chance cheers

[frankiecarroll]

I have a Stihl ht 56c want to upgrade from 10 inch bar and chain to the 12 inch bar and chain . It has the pico 1/4 sprocket what part number is the 3/8 speocket . And how many washers wil i need

[kenlowrey]

Where can I get one of these sprockets?

[magicone]

The bigger sprocket diameter will give you a higher chain speed, not so much torque. Think of putting your truck in 5 th gear and start up a hill vs 1 st gear which one will get you to the top fab steep hill?

[desmondgaddis]

How can contact you? I have pole saw question

[robertstewart]

A larger sprocket should provide more speed and less torque.

[gaming.iguess]

Dude I spent 45 min at the store last week trying to explain to the morons there that I needed the flat sided sprocket and they looked at me like I was crazy since they said it "had" to be circular,

[mcbrnd]

How about you do a video with the ORIGINAL PARTS or ATLEAST the parts you took off!
Im almost positive that not one viewer has YOUR "UPGRADED" SPROCKET on hand and are looking to see how and what order the ORIGINAL washers and cup washers were installed.... 🙄