filmov
tv
FMS Model Offcial 1:24 FCX24 Power Wagon Hip-Hop Truck RC 4WD Car Special Movements
Показать описание
🎉FMS FCX24 1:24 Power Wagon
Introduction:
FCX24 is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
The crawlersare generally equipped with front and rear straight axles to simulate the locked state of the real car differential to improve off-road passing ability. The FCX24 is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained. Simply put, the straight axle is suitable for extreme climbing, and the limited-slip differential is suitable for high-speed off-road. The choice is yours.
The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. You can experience the fun of high-speed breakthrough, small jump, and even heading up.
Stainless steel ball bearings are always the favorite of players, but in order to reduce the street price, most brands will choose bushings as a replacement for all or part of the bearings. However, considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all.
As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. We put the reason and future development in this story to share with you.
2.4G 4-channel digital proportional remote control system, in addition to normal driving and steering control, the CH3 is used to control shifting, and the CH4 is reserved for players’ imagination expansion. It is also equipped with a lighting control module, and the headlights can be switched between high and low beams. In addition, interfaces for taillights and turn lights are reserved for players to modify.
Unlike previous FMS products, FCX24 focuses more on sports performance. A large number of upgraded and modified parts such as metal gears, shock absorbers, high-performance motors, radiators, and wheel hub counterweights will be launched simultaneously. Players from all over the world, look forward to you creating your own unique FCX24.
Features:
- Some features that other RC models lack.
● The first 1:24 scale model on the market includes a two-speed transmission.
● The Portal Axle improves off-road capability.
- A High-Performance Monster
● 24 Ball bearings full set allows the wheel to rotate smoothly and with minimal friction.
● Metal gears are used in the steering servo for rugged, dependable service in extreme conditions.
● Four link suspension aids in reducing steer and torque twists.
- High-quality body and designed for maximum enjoyment.
● Car Body Quick Separation
● More enjoyable with a elaborate lighting system
● Create your own Power Wagon with the original personalized stickers
Where to find us✨🎉
Introduction:
FCX24 is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
The crawlersare generally equipped with front and rear straight axles to simulate the locked state of the real car differential to improve off-road passing ability. The FCX24 is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained. Simply put, the straight axle is suitable for extreme climbing, and the limited-slip differential is suitable for high-speed off-road. The choice is yours.
The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. You can experience the fun of high-speed breakthrough, small jump, and even heading up.
Stainless steel ball bearings are always the favorite of players, but in order to reduce the street price, most brands will choose bushings as a replacement for all or part of the bearings. However, considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all.
As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. We put the reason and future development in this story to share with you.
2.4G 4-channel digital proportional remote control system, in addition to normal driving and steering control, the CH3 is used to control shifting, and the CH4 is reserved for players’ imagination expansion. It is also equipped with a lighting control module, and the headlights can be switched between high and low beams. In addition, interfaces for taillights and turn lights are reserved for players to modify.
Unlike previous FMS products, FCX24 focuses more on sports performance. A large number of upgraded and modified parts such as metal gears, shock absorbers, high-performance motors, radiators, and wheel hub counterweights will be launched simultaneously. Players from all over the world, look forward to you creating your own unique FCX24.
Features:
- Some features that other RC models lack.
● The first 1:24 scale model on the market includes a two-speed transmission.
● The Portal Axle improves off-road capability.
- A High-Performance Monster
● 24 Ball bearings full set allows the wheel to rotate smoothly and with minimal friction.
● Metal gears are used in the steering servo for rugged, dependable service in extreme conditions.
● Four link suspension aids in reducing steer and torque twists.
- High-quality body and designed for maximum enjoyment.
● Car Body Quick Separation
● More enjoyable with a elaborate lighting system
● Create your own Power Wagon with the original personalized stickers
Where to find us✨🎉
0:00:15
FMS Model Offcial 1:24 FCX24 Power Wagon Hip-Hop Truck RC 4WD Car Special Movements
0:02:10
FMS 1:24 FCX24 Power Wagon Official Full Version Introduction and Driving Release
0:17:35
Unboxing & Review - FMS FCX24 Power Wagon 1/24 Scale RTR Crawler
0:00:45
FMS 1:24 FCX24 Power Wagon Ready to Run 4WD Official Trailer
0:00:56
Power Wagon by FMS Model. Crawler FCX24 #fms #rccar #rcoffroad #powerwagon #modelcar #remotecontrol
0:06:32
Fms Fcx24 Power Wagon VS Axial Ford Bronco 1/24 4x4 Mini Rc Car Truck Crawler Super Test
0:02:14
🎉FMS 1:24 FCX24 Lemur RTR：Unleash Instincts, Challenge Boundaries
0:08:36
This RC Crawler Is Unusual For The Brand! - FMS Model FCX24 Lemur
0:00:44
Power Wagon by FMS ModelCrawler FCX24 #fms #rccar #rcoffroad #rc #remotecontrol #fmschallenge
0:03:05
FMS 1/24 scale Smasher FCX24 Blue White 4WD Monster RC car RTR Unboxing
0:00:12
SCX24 vs FCX24 RC 1/24 Scale Tug-O-War “Who will Win?” #rccrawler #scx24 #rcoffroad #fcx24 #rc
0:03:06
Fms Blazer K5 Rc Car 4x4 Fms Model 1:24 FCX24 Chevrolet
0:02:43
FMS 1/24 scale Chevrolet K5 Blazer 1976 FCX24 RTR Official Release
0:00:27
From Box to Off-Road Freedom!
0:00:21
Fms Fcx24 4wd 1/24 Rc Car 2 Speed #fms #shorts
0:10:03
$150 Radio Controlled Chevy K5 Blazer! FMS FCX24
0:00:14
FMS 1:24 FCX24 K5 Blazer RC Pickup
0:00:11
Fms Fcx24 Mini Rc Truck 4x4 1/24 #shorts #fms
0:09:28
Power Wagon FCX24 By FMS | 1/24 Scale Performance Truck | Unboxing & First Drive | Cars Trucks 4...
0:07:43
FMS 1:24 FCX24 Chevrolet K5 Blazer RTR Unboxing
0:00:56
FMS 1:24 FCX24 Lemur RTR Unboxing ：Conquer Limits | Epic Off-Road Adventure!
0:02:05
FMS 1/24 scale Smasher FCX24 Blue White 4WD Monster Truck RTR Official Release
0:00:49
Chevrolet K5 Blazer by FMS models FCX series. 1/24 scale. 4WD. 2 stage gear box. #FMSchallenge #fms
0:04:39
FMS 1:24 scale Smasher V2 Unboxing & Transmitter Instructions FCX24 Blue White 4WD RC car RTR
Комментарии