MXR Iso-Brick™ Pro Power Supply

The MXR Iso-Brick Pro Power Supply delivers clean, steady voltages to a diverse range of pedal types in a sleek form factor so that you can confidently power your entire board without any extra bulk.

POWERFUL VERSATILITY.
Every one of the MXR Iso-Brick Pro Power Supply’s outputs is fully isolated to preserve signal purity and cut out environmental noise. Catering to an array of power requirements, this unit offers six fixed outputs—two 9V DC at 500mA and four 9V DC at 300mA—and two switchable 9/12/18V DC outputs at 500mA. Even high-demand multi-effects units are covered, with a dedicated 9V DC output at 1.5A for units such as the Line 6 HX Effects processor and HX Stomp amp/processor.

Expanding your setup? The MXR Iso-Brick Pro Power Supply features a dedicated 18V DC link output at 2.0A so that you can seamlessly connect to a secondary power source such as the MXR Iso-Brick Power Supply or the MXR Iso-Brick Mini Power Supply.

Juicing it all up has never been simpler thanks to the inclusion of an IEC power input. You can use any standard IEC power cable, and ditch the obnoxious wall warts.

ALL ABOARD.
With its compact, lightweight design, the MXR Iso-Brick Pro Power Supply is perfectly sized to fit under most Pedaltrain pedalboards—and it comes with all the mounting brackets and screws you need to set it up.

POWER UP WITH CONFIDENCE.
The MXR Iso-Brick Pro Power Supply will keep your effects pedals running smoothly and quietly, and its slim-yet-robust construction allows you to keep space open for all of your favorite pedals—whether low-powered analog overdrives or high-powered digital multi-effects processors. Power up with the MXR Iso-Brick Pro Power Supply.

Delivers clean, steady voltages to a full range of pedal types
Sleek form factor fits under most popular pedalboards—mounting brackets & screws included
Power everything from low-current analog pedals to high-current multi-FX units
10 total outputs, each fully isolated to reduce line noise:
Four fixed outputs 9V DC @ 300mA
Two fixed outputs 9V DC @ 500mA
Two switchable 9/12/18V DC @ 500mA outputs
One dedicated 9V DC @ 1.5A output for high-demand multi-FX units
One dedicated 18V DC @ 2.0A output for power supply linking or powering a 18V pedal
IEC power input eliminates inconvenience of wall warts and allows for the use of any standard IEC power cable

[skineyemin]

AT THE 33 second MARK, THAT IS NOT AN ISO-BRICK PRO "M242", THAT IS THE ISO-BRICK PRO "M238". THE "M242" DOES NOT HAVE THAT "ADAPTER PLUG POLARITY" OR IT IS NOT LISTED AS THAT ON THE "M242". IS THE" LINK 18V 2.0A" FOR AN 18V 2.0A POWER ADAPTER? BECAUSE, I DID NOT SEE ONE IN THE BOX OF THE ISO-BRICK PRO AND WANT TO BE CLEAR ON HOW TO USE THE CABLE ADAPTER INCLUDED IN ONE OF THE BOXES LISTED, "CABLES". WILL I HAVE TO BUT ANOTHER POWER SUPPLY IF I DO NOT WANT TO USE THE IEC POWER CORD?

[feelmytool]

Wait a gosh darn minute, are you guys saying if we already have an ISO-Brick that we can hook it up to this and still use it?

[GerryBlue]

Price please? can't find it anywhere