Lemon RX Gen 2 | Telemetry & Stability DMSX Airplane Receiver

The Lemon RX Gen 2 is a telemetry and stabilization receiver for aircraft models, available in 7 and 10 channel versions. The receiver provides telemetry functions such as voltage and current readings, altitude and vertical speed readings, and can be used with radio master and spectrum transmitters. The Gen 2 receiver is an improvement over its predecessor with better software and updated gyro and signal versatility, featuring a bind button, mode change button, and programmable fail-safe button. The 10 channel version also has 2 Bec ports for those running larger and more server. Both versions have the ability to add a satellite receiver and both can be equipped with current and voltage sensors.

If you like this video, be sure to give us a *Thumbs up!*
*Please support our shop any purchase even a pack of props helps us out.*

1) SUBSCRIBE to learn how to update your hobby gear and hear the latest reviews on products we carry - Remember we do not carry the junk - it must pass our confidence test!

More information on the LemonRX Gen at Grayson Hobby

*Airplane We Tested and APPROVE*

4) LET'S CONNECT

Come Visit our Brick and Mortar FPV & Hobby Shop - Touch and Feel before you purchase!
GraysonHobby
220 Old Loganville Road
Loganville, GA 30052 - USA
Tel [phone])

#lemonrx #remotecontrol #radiocontrol

[mrnickkk]

Hi guys, can you show how to set the 7 channel receiver up from start to finish please? Thank you

[stevendegiorgio]

That receiver sounds real good.I also like the Radiomaster transmitters.I currently fly on a Spektrum DX8 gen 1.

[DMOFO]

What happened the video kicked off and cut off when one of you guys was talking about the manual?? Also I have a question about the gyro which type of gyro is using the one for beginner's with angle limits or is it the one that works like a AS3X or Aura 8? Also is there anyway to adjust the gyro gains through the Radiomaster TX16S??

[upperechelon]

Great video. This is a long time coming. 😊

[garywardsr.]

nice video, could you show how to set up the stabilization to a spektrum receiver?

[vectorvictor]

Can you please do a video on how to set up the gyro on this one? I can’t get mine to work

[jimhenriksen]

Hi guys, how many flight-surface channels do you get while using the gyro? IOW, must you leave the 5th/gear channel unused as a 6 channel if you want the gyro? Oh also; thank you so much for showing us where the battery voltage meter goes into the red balance lead.

[GTARC_au]

Always an educational visit! Cheers guys!

[mytubehkjt]

Does the energy meter work with 6s. The instructions seem to suggest only 5s maximum. Would really appreciate the clarification before I buy as most of my setups are 6s. Cheers.

[charlesrestivo]

So I purchased a 7 channel lemon I simply cannot get the red lights for modes to come on and I can't turn it on and off .It does work as a reciever but I wanted to utilize the stabilizer

[illuminatorix]

Hello! Is there any video how to bind this receiver with Radiomaster TX16s EdgeTX? I can bind my Spektrum AR631 but not this one!

[AlvinBustamante]

I'm getting the wrong voltage reading from the basic voltage sensor plug into the battery balance port with the 7ch rx on my IX14. When I use the current voltage/current sensor it shows the correct voltage.

[davidjacobs]

I'm getting 0.00 for A2, A3, RB1V, RB2V.
Tmp2, Alt, VSpd seem to be working fine.
Do I have a defective receiver ?

[fransnijenhuis]

where can i find a list with telemetry values for the external battery, i use the same configuration you show in this video
i know hoe to setup the wiget screen but cannot find the value for the external battery in percetage left

[gliderrider]

Do these have sound on altitude and vario functions?

[thusted]

I just purchased one from Grayson, got it in a few days, always great prices and fast inexpensive configured it in my easy to setup...but the leds are not labeled so have the pdf manual stabilization, not auto-level - which is fine when you realize you get current, voltage, temp and barometer sensors as part of the don't need anything 'smart' in your plane....works with all esc, battery TX16S w/Edgetx 2.8.1 found all sensors

[budsimpson]

Is there a direction for mounting the gen2? The gen 1 required the receiver to be mounted pins forward and label up. Yes you could get by mounting it upside down if you reversed the servos.

[charlesrestivo]

Using a dx9 any help would be appreciated as it'll just get thrown away if I can't get it to work

[nielsdahl-rasmussen]

Hi How do you calibrate old current/voltage sensor vith the new 10 channel reciever?

[RussianThunderrr]

Say, with a build in barometer can it also do a weather forecast?(it’s a “rhetoric” question). Off to buy that next Rx. Thank you, fellas.