Reset Oil Life Reset Honda Fit - Reset Oil Service Honda Fit (2007-2010)

This video will show you how to reset your Oil Life to 100%, also known as Reset Oil Service on Honda Fit 2007 to 2010. This indicates when you should do an oil change and should only be reset if you have done an oil change on your car.
The procedure is as follows;
1. Turn the ignition to run, which is one turn away from starting your car.
2. Press the select knob repeatedly until the engine oil life indicator is displayed.
3. Press and hold the select knob till the oil life starts to blink; you may have to hold it for around 9 seconds, so be patient.
4. Once the oil life starts to blink, let go of the knob for a second.
5. Then again, press and hold the select knob till the oil life resets to 100; this may take 6 or more seconds. After it sets to 100, your done!

To verify, you can just turn the ignition off and back on, and, you're all set.

#hondafit #servicereset

[xTheGameViewerx]

Works on any model fit, the button will just be in different areas

[kimw]

Thank you for this instructional video. Straight to the point and very helpful!

[IAMDC]

So simple it's crazy. Thank you, it was driving me crazyy

[jkid]

Thanks so much! I always forget how to do this and your video is to the point, and helpful.

[jimf]

It worked! Thanks. That dam wrench was driving me nuts. And more importantly, I hit a piece of loose concrete on the street, which hit my gas tank and wrecked my gas gauge. So now I use my odometer to keep track of my fuel consumption. So it was a real pain. With synthetic oil I still got 3000kms to go.

[AriannaQuiero]

Thank you very much, that was very easy and to the point!

[connieoneil]

Thanks for sharing! I just had that light show up!

[rhdalllday]

Here again 😂see you in a few months 😂😂

[KJunkie]

My go video everytime the guy forgets at the autoshop.

[jimf]

Hope this works on mine. I’m using synthetic, so I need to reset it before it drives me crazy