SVE S550 Mustang Front Bumper Repair Kit (15-17) - Install

Reattach the broken front bumper tabs on your 2015-2017 S550 Mustang by installing SVE's front bumper repair kit! From the factory, your Mustang's front bumper cover was secured on each side by flimsy plastic tabs. After numerous removals of the front bumper, these tabs begin to weaken and break off. This poor design led to a major complication where the bumper tabs would 'pop' out on each side, causing an unsightly fitment between the fender and the front bumper. To resolve this troublesome issue, SVE has developed a cost effective repair kit to avoid the body shop while simplifying the removal and installation of the front bumper.

SVE Quality
Specializing in providing problem solving solutions for late model Mustangs, SVE's products are built to last and this front bumper repair kit is no exception! The quality of research and development can easily be seen by the sleek, low profile design of the quick push fasteners. Manufactured with durability in mind, these fasteners feature a billet aluminum construction and are finished with a black zinc coating for corrosion resistance. Utilizing a factory square hole on the fender to bumper bracket, SVE provides two stainless steel studs and the corresponding retaining hardware to correctly secure the push fasteners that hold the bumper tabs in place. With years of Mustang knowledge and experience, SVE is proud to present this solution based kit to ensure your S550 Mustang front bumper tabs never pop out again!

Installation Note
Drilling a hole in your front bumper is required!
Measure twice, drill once! Make SURE the panel alignment is where you want them BEFORE drilling!
Drilling a hole in the center of the factory plastic bumper brackets is required in order for the quick push fasteners to sit flush.
It is HIGHLY recommended that blue thread locker compound be applied to the retaining hardware upon final adjustment.

Application
Fits 2015-2017 Mustang

Parts In This Video:
SVE-17957-KIT
______________________________________________________

#LMR #S550 #Mustang
______________________________________________________

[UnknownAGENT]

This was such an informative video. There’s other videos on YouTube but this one was thorough from start to finish. Good job!

[joshuaflores]

Your best bet is a new bumper, followed step by step and needed so much more fabrication and drilling

[kracusomniax]

I saw some people at Carlisle with this and it looked good. Most if not all had painted it to match the body. It honestly just looks like another BLIS sensor.

[cesarmagana]

Can this also work for a s550 gt500 conversion bumper?

[renegarcia]

It’s not difficult guys if you want a pin on your bumper that’s you but I know I don’t. I simply went to my local body shop and told them if they could do some type Mickey Mouse on it and they just applied black glue in the back even it out, let it dry and I was good I never once had an issue with it it’s still in place and they only charged me 20 dollars. For those wondering what if I need to remove my bumper in the future well I told them eventually I’ll want some headlight work and I’ll need to remove my bumper they said no big deal you simply pull it out 👍

[chadc]

Sorry, just my opinion, but that looks terrible !

[_Kas]

cant you just use a replacement bracket?