2004 TOYOTA TUNDRA DOUBLECAB SIGNAL LIGHT SIDE MARKER LAMP ASSEMBLY REPLACEMENT - EASY DIY!

Just a quick video showing how I replaced my 2004 Toyota Tundra Doublecab signal/side marker light assembly with replacement lamp assembly from TYC. This is the same for some Toyota Sequoia's as well. The outside shell of my light came off when I was removing it so I ordered this replacement. The trick to getting the old one out without breaking it is to use a shoelace or something similar to pull it from behind. It's only held in place by a plastic tab that clips in and a small plastic screw/rivet.

Tools needed:
Philips Screwdriver for the small plastic two piece rivet/screw that holds the assembly in place.
And just a shoelace or small flat strap or rope.

The Toyota part number for my truck was OEM# 81510-0C020, and the TYC Part number is: TYC 18-5787-00. I recommend double-checking your manual and the amazon parts finder tool to make sure this would fit your vehicle.

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man

Song is 'Psyche' by Dyalla

As an Amazon Associate I earn from qualifying purchases.

keywords: Side Marker Assembly broken plastic housing signal light TYC 18-5787-00 Compatible with TOYOTA Sequoia Passenger Side Replacement Signal Lamp driver's side

[classicgent]

Shoelace trick worked like a charm💎Thank you🙏🏼

[eant]

Wasn’t until after I ripped the front plastic off my light housing did I find this video…literally took me 2 sec to get the housing out this way

[Greybeardmedic]

I should know to check out your site first. Awesome trick!

[tonyrodriguez]

thank you so much for you video very helpful

[RIKSUAVE]

Thank you so much. This tip really helped me out.

[bobbarnes]

Dan, have you found a set of headlights that fit a 2004 Doublecab? They're very hard to find.

[caitlinparker]

Mine is still stuck and now I can’t put the Philips screw back in