Spitfire Mk IX - 1/48 - ICM 48061 Build with RAF figure

This is my build of the SPITFIRE Mk. IX from ICM in 1/48 scale.

Kit : ICM 48061
Figure : PJ production 481102 - Raf Fighter Pilot WWII.
Glue : Tamiya Extra Thin.
Paint : Vallejo surface primer & Vallejo model Color/Air.
Varnish : MIG AMMO lucky varnish (both gloss & matt).
Decals : Decals from kit.
Decal setting solution : Microscale Micro Set + Sol.
Glue for clear parts : Microscale Micro Kristal Klear.
Tape : Tamiya Masking Tape 6-12mm.
Antenna : Thin plastic sewing thread from local warehouse.

Music : Aakash Gandhi - Chariots of War.

[cosmarendy]

Thanks, I have this kit to build. In the past I’ve had mixed experiences with ICM models. Your video has encouraged me somewhat.

[fishtacoguy]

I am currently building an ICM Spitfire (beer hauler version #48060), and had the same fitment issues. I also had clearance issues with the hood and top of engine; the firewall seems to be too large for proper alignment, much sanding was required. Gaps exist along the wing to fuselage as well. I am filling and sanding these gaps in several areas, I hope a few coats of primer with help to even these areas out prior to painting.

[ericbeaton]

Really enjoyed your video. I have ordered myself a couple of ICM Spitfires and because I had read a couple of mixed reviews I was curious as to the quality of these kits. You have done a really good job on the paint finish on the spitfire and the pilot figure.

[tonimancer]

Great build and well explained have subscribed and will now look at your other videos.

[grizzly]

Awesome build. I had been wondering about the quality of the ICM kits. Particularly this MK IX Spitfire.

[davidroberts]

That is a good looking model. Well done.

[jr]

Nice video and result for the kit. I have a couple of these ready to build, one Mk VIII that I plan to do in U.S. markings and one Mk IXc as part of the "Moscow Air Defence" set that also has a MiG-3 and Yak-7. Good to know of the issues beforehand. I hate putty and will spend a lot of time shaving plastic or adding it if a part is too small and leaves a gap. If all else fails I will use CA and baking soda. Most kits I have found you can figure out what's causing the gap and resolve it without using putty. I have heard the major issue with ICM Spitfires is that if you use the engine parts, then you won't be able to close the top of the cowling.

[pswift]

Incredible detail and painting skills! Superb 🙂

[ЕвгенийСлинкин-сз]

Коротки ролик, но все понятно объяснено. Отличная работа.

[jackpreston]

Excellent, looking forward to seeing more from your channel, thank you....

[iangoldstraw]

Nice Spit.. Had similar problems with mine as regards the sink marks on the wings by the ailerons....

[grownjohnboy]

Thank you for your excellent review. I just ordered this kit. After watching you assemble yours, I am looking forward to building it this Winter.

[babel]

I had same issues with the front lower and upper cowlings, i bought 2 of this kit off ebay, I also have huge gaps at wings hopefully i can watch videos like this one and figure out how to build the next one better.. the price for the amount of detail is really good, but I'm just getting back into model building after 30 years away from it.. may not have been best choice for getting back into the hobby.

[swing.wing_singh]

Beautifully done. Nice videography too.

[johnmclean]

This is a beautiful job. I think some modellers take the weathering too far. Less is more for me as apart from Malta and the desert, the aircraft were looked after pretty well from the photos I have seen. I would have added some chipping on the engine cover dzus fasteners though. Overall - a superb job. I don't think the antenna wire was necessary, but I could be wrong...

[felipfelop]

Thank you for the insight and your colour choice which many model builders dont add, which colour did you use for your prop spinner in this case, great build

[marvinbanka]

I've built the different marks of Spitfires from ICM first. Then looked to other manufacturers for other marks.

[TheCombatartist]

Very nice. Never use white for your eyes - never.

[willneve]

It’s me again, final comment as I know I’m spamming now 😂 what Matt coat do you use after decals are done to make whole model less shiny ?

[jimmytgoose]

I built this kit 20 years ago ; i liked it 🙂
Until the Eduard kit arrived it was the only Mk. IX worth bothering with - the Hasegawa kit is dire .