Safety Wire TUTORIAL. DIY Header Bolt Install Pt.2

In the last header bolt video, I just safety wired the bolts without showing how, but it has come to my attention that a lot of people have never used, or even seen safety wire before. So here is how you do it!

~~Social Media~~
Will's Builds

Production:
Canon T1i
ZOOM H4N
Adobe Premiere Pro

[Hypegsynth]

the holes for the safety wire to those hex flange bolts should be drilled on the plate, that metal on metal contact by trying to connect the bolts will damage the pipe/duct in high vibration

[glenchallis]

Thanks, great help, very well explained.

[alksmdlaks]

FYI the FAA guidelines as stated in AC43.13-1B are that there should be 6-8 twists per inch, not 7-12. Very important for anyone learning this for Airframe and Powerplant or aviation mechanic reasons. You don't want to fail a practical test because you put twice the number of twists that there should be.

[mck]

good vid. maybe you shouldve gone under the pipe to prevent it from sliding.