Hobbyking Walrus Glider 1400mm Maiden Flight SNAKE

This thing is great,for pros or newbies.Handles like a dream,responsive and quick but not fasssssst.Dont hesitate if youve been looking at it,pull the trigger.One thing make sure you check the motor mount screws after your first couple of flights,after today when I got home on inspecting the plane and all srews and connections i found 1 motor mount screw all the way out and another loose about 1/4 out. But overall no biggie.......Good job HK!!!!!

Update 10/9/12 Flew again today and 2 screws came out again of the motor mount.Got them in now with locktite make sure you do the same....happy flying.

Update 10/21/12 locktite did the trick no trouble today,all screws in place.....

Update 1-2-2013
Finally got the props I ordered from Hobbyking here is a link
The spinner is not the same size a little smaller but its no problem.
This is a great replacement,flys great with it.

Specs:
Wingspan: 1400mm
Length: 1036mm
Wing Area: 22.30dm2
Flying Weight: 750g
Motor: 2212 Brushless Outrunner 1350kv
ESC: 20A w/BEC
Servo: 9g x 6
9x6 Folding prop
2200mAh 3s 20c Lipoly Battery On this flight

[GeorgeGardinier]

i have come across this and good video, do you use this plane after, do the flaps work well

[axerhand]

I just got one,   but  no  instruction on how to set the brake on the esc?   do you still have  plane  and remember  how to set it thx glenn

[fruitjuice]

Nice video. Does anyone know how long the glider can fly? (with motor)

[ScottSparks]

Hi, was your ESC already setup to brake when you cut the throttle? I've just got one of these and I can't figure out how to get it to work. The rotors just keep spinning!