How to Replace Rear Sway Bar Links 2011-15 Kia Sorento

Buy Now!

Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your Sway Bar Links 2011-15 Kia Sorento.

This repair was done on a 2012 Kia Sorento LX 3.5L and the process should be similar on the following vehicles:
2011 Kia Sorento
2012 Kia Sorento
2013 Kia Sorento
2014 Kia Sorento
2015 Kia Sorento

Tools you will need:
• 21mm Socket
• 3/8 Inch Impact Gun

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[SunnyD]

How long of a job is this? Wondering about labour charges

[jerryshafer]

is there one on each side of the rear on the 2012 Kia sorento?

[travismasters]

Use a torque wrench but don't tell us the spec...