How to Replace Rear Sway Bar Links 2013-2019 Ford Escape

Показать описание

Buy Now!

This video shows you how to install new TRQ sway bar links on your 2013-2019 Ford Escape. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape

Tools you will need:
• 19mm Socket
• Pliers
• Safety Glasses
• 5mm Hex Socket
• Wheel Chocks

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.