How to Connect a Brushless DC Motor to Controller (48V 750W E-Bike) in English

A video instruction on how to connect a Brushless DC motor to a BLDC controller (48V 750W) for E-Bike or electric scooter. The video explains the different wiring features and how to safely make the connections. The video also describes the functions of the hall effect sensors in BLDC motors.

Wiring:
Battery wires: Large single red for positive and black for negative
Ignition wire: Small single wire
Phase wires: Single medium size yellow, blue and green
Hall sensor plug: It has five wires, red, black, yellow, green and blue
Throttle plug: It has three wires, red, black and teal
Pedal assist plug: It has three wires, red, black and blue
Speed meter plug: Single purple
Break plug: Black and orange
Reverse plug: Gray and black
Learning wires: Two single white plugs

If you found this content meaningful and useful, please support this channel by subscribing and liking the video. Thanks!

Products in video:
Brushless Electric Motor Kit, 750W DC 48V Brushless Motor Gear Reduction for DIY Tricycle, E-Bikes, Electric Scooters

Related Products on Amazon and eBay:
Terminal block/board
48V 1800W Brushless Electric Motor Controller Throttle Grip Pedal Wiring Harness Charger Plug Chain Ignition Key Kit for Go Kart Scooter E-Bike Motorized Bicycle ATV Mini Bike
Electric Tricycle Motor Brushless Geared Motor Bicycle Conversion kit Motor Controller for Tricycle Rickshaw Three-Wheeled Bike, DIY Part (750W 48V)
48V 2000W Brushless Motor Kit with Controller Grip Key and 3 Speed Shifter
24V/36V/48V Electric Bike Throttle Grip Electric Scooter Battery Voltage LED Indicator Power Key Locker Accelerator
12V Sealed Lead Acid Batteries:
12V 7AH Sealed Lead Acid Rechargeable Battery
2 pack--12V 7AH Sealed Lead Acid Rechargeable Battery

Please note that I do get a small commission when you purchase any product provided here. Thanks again for your support!

Please subscribe for more future DIY videos and share if you think someone else can benefit. Thank you.

Check out my other videos:
Fast and Powerful 48V 1000W e-bike Conversion kit Installation
How to Connect a Brushless DC Motor (BLDC) to Sensored & Sensorless Controllers (2021)
How to Charge a Battery--lead acid and lithium-ion batteries (2021)
Powerful Electric Bike Conversion Part I (E-Bike Conversion Kit Installation)
Powerful Electric Bike Conversion Part II--Lithium-ion Battery Power Boost Upgrade

[vibyvargas]

Thank you much dude my son is so happy I was able to wire it up all because of how you explained. Thank you

[Vikitech]

I’m happy to see one person do this in English..thank you great video

[joelcortes]

Honestly this type of controller is intimidating. Just looking wires everywhere don't know where to start. But this guy made it so simple.
Thanks for sharing 👍

[jrebuilds]

Great video! really helped me understand some of these controller that don’t really give any markings on their wire. Will help me for my project. Thank you!

[cosmicwanderer]

Thanks for sharing. I'm planning to use just the batteries, a DC/AC inverter, the 24V DC motor and a permanent magnet generator (output of 220V). The motor will power, (rotate), the permanent magnet generator. I will get current from generator to feed my equipment and feed the inverter which will keep my batteries up to the task. I hope to reduce my energy costs and be ''off-grid'' at least 80% (eventually). Energy costs are sky-rocketing and will prevent any ''hit to my pocket'' down the road. Again, thanks for sharing.

[unitedforce]

I just started to get into electric bikes, and your videos explain so much.
Thank you so much

[adityabhaskara]

Thank you so much this video was really helpful

[safarijonas]

Thank you! VERY well explained with good lighting and organization.

[AlexandreMMadeira]

I have the same exact throttle but my controller doesn’t have ignition wire. Any solution? Your video was the best a saw so far on the topic.

[williamvan]

Out standing videos 👍👍👍 this will help me with My E-bikes great job thanks again for your help

[elijahpd]

This tutorial is awesome and very helpful, thank you so much. please make a tutorial on how to use the REVERSE and the BRAKE cables connection. Thanks!

[Jademyheart]

Thank you 😌 as everyone says!
Brilliant upload, learnt something fascinating & very cost effective!!

How good is this guy 👌👍💯

[hrcsteubenville]

I have an escooter that just died. I installed new batteries and I get nothing. How can I trouble shoot the controller. You are the best in explaining how things work and troubleshooting. Thanks for your videos.

[snuffysbluff]

Thanks a bunch. Your presentation was great and helped me a lot. Keep it up.

[omarfa]

AWESOME VIDEO !!. . The only thing I can think of would be if you added timestamps for each parts of the video. Hope that helps

[DougDiLaura]

Thank you very much sir. Excellent Video and very clear. Helped me very much in my conversion project.

[GregStewartecosmology]

I have a pedal assist PAS set up, can i somehow substitute with the throttle wires?
Thanks for uploading, very helpful video

[zxarmilla]

Basic and really recommend to those who doesnt in wuch of electrical wiring 😘

[shivdayalbhandari]

Thanks of lot I cont connect the connection properly I watch our video now ok thanks again

[YagwitOG]

Best Tut we have ever watched. Thank you!!