TPR 86cc Build : Part 13 : Getting Ready To Roll

In this video, I try out the Dr Pulley clutch again and then focus on prepping for riding around at the beach for a car show.

✅Tip Jar (Did this video help or entertain you?)✅

Thank you for watching! Please Like and Subscribe if you enjoy the content! Click the bell when you subscribe to make sure you get updates.

Find all of the videos in the 86cc build playlist :

Song YouTube Audio Library (attribution free) :
-69 Bronco by DJ Williams

[bradentibbles]

Such a good series. Super informative! Gonna make a few tweaks to my set up based on what I've leaned in this series!

[sammie]

Thank you for the great content, cant wait to get my build completed and come back home to ride.

[artistsunitedfront]

I'm 250lbs. right now on my set up I have yellow malossi in the clutch, white in the pulley and 5.5g rollers. using a 19mm dello carb and cast malossi sport 70cc kit. GET a malossi delta clutch! SO DAMN GOOD! I have had mine for a few years and ZERO complaints. The delta has weights you can adjust for grab power. When my clutch engages it has almost never slipped. You can adjust the tension on the clutch springs also, so in my case I can put in yellow I can adjust them so they engage even a little later if desired.

[xinixxagnix]

You are a amazing mechanic and your build is mindblowing xD All the best m8 ;)

[johncoscia]

Great ways to increase that valuable space for travel in the variator or front pulley . I found extra by very simple means[ a file] as I noticed the fixed half has a bit of material from casting under the star locator, the groove where it fits engaging the splines. As well as filing to a flat seating surface, the plastic guides if possible on the side that they seat. 1mm gain .lol.

[jeffhamilton]

Looks like it's ready for the red light racing👍

[Pluke]

U really need better exhaust.bigger carb and please got a rotor.that will turn this into a beast

[flee_N_Elude]

That's the only thing I hate about manual shut offs, it's scared the shizz out me before thinking I done screwed something up lol

[ItsMe-djzd]

Hopefully the weather holds out for some red light drags. Great build series!

[srwickpro]

try using small rollers named canon bullets and from cluch

[deurlii]

I know that you specialize in minarelli, but could you please make a video about a piaggio 2stroke engine? I’m quite interested in what the differnces between these 2 engines might be.

[george]

In the future on that Dr pulley clutch try the one set of spring but the lightest ones you got .
On my I try the lightest and it work fine crabs right away . anyway just an idea .

[dendys]

12:41 im having the same issue but i dont have a lathe so i was thinking maybe a piece of a sandpaper and do it that way ?

[wsmaga]

Thanks for sharing your build. I thought that you kept the panels off for tuning purposes. And i also thought that gas tank was just temp.

[andreww.]

Hi, so cool that you’ve got the scoot done, well done for now, because all projects never end. I also saw your Minarelli 90 swap a long time ago, do you think it’s worth it to swap a 90cc Minarelli into a scoot for fast and reliable performance?

[edgarnunes]

You make really good videos I always watch them I have a QJ1E40QMB-4 two stroke engine and I want to get parts to modify it but I don’t know what kind of engine is would you help me out and we’re can I get performance parts for it

[alexlaikmets]

It dont grab as hard becouse you are using 24kg clutch springs try use the 16kg clutch springs and a harder torque spring,
Gretings froms sweden! Great vids!

A freind of me have an piaggio ciao with an minarelli engine that is benched for 27 hp, with an bored rt70 and ported

[jeffw]

Question for ya.. when I pop my cvt cover off the belt is like a half inch from the outer edge of the rear pulley.. would you suggest putting shims in the front variator like you did here in this video? Also what am I losing by it running so low on that pulley? Thanks for your reply..

[korayyuzbasoglu]

Hey buddy why you are not trying different pipe ?

[justkicks]

Cool scoot seem's to be running like a bat out hell, nice tune . Wish I could get time off work to join the cruise not supper far off ( Ohio ) maybe next year my friend. Looking for a winter time project with my son & stumbled across a piaggio LT 50 are you familiar with ! I've been researching parts & was told it runs good, I know the higher end scooters parts get $$ . Good job with the build 💯🤘