Setting up Bluejay for Mobula7 1S and PID tunes

Setting up Bluejay for Mobula7 1S and PID tunes in case you find the tunes a tad too aggressive is in this video. As requested, I hope this video helps in tuning your Mobula7 1S the way you like it and slightly better control with the Bluejay ESC configurator.
I did not really go into specifics but just the basics to get you flying as soon as possible rather than spend more time tuning, although a perfect tune does make the flight more enjoyable, I hope the video helps in any way possible!
About Bluejay
Bluejay is a Blheli_S firmware that supports bidirectional DSHOT which allows you to run RPM filtering on your Blheli_S ESCs. It also allows you to run 24khz, 48khz and 96khz PWM frequency on your quad.
More info on bluejay:-
Bluejay configurator

Join my discord

Happymodel Website

Happymodel Official Team Pilots.
And of course not forgetting my teammates Youtube channels:
Nathan Loopz
Joseph De Guzman AKA 'Jiggy'
Tristan Teft AKA 'TDogFPV'

[amin_acid]

Thank you from the future a year later. Going to watch this a few more times, this is sorting out so much stuff for me right now. The BlueJay tips are great. Plus a baller rip afterwards! Cheers!

[sakfpv]

I just got mine in today, got ELRS v3.1.2 working, has the x12 1-2s board, 400mw vtx, and spi ELRS. I bought it mainly for the board, I'm going to rip it as a whoop for a while, but I have a 1s babytooth frame, 1202.5 11, 600 hglrc motors and a caddx ant, that's what I want the board for. I have the x12 in a 2s babytooth build and love it. It's a ripper. On the 2s I have 1204 8000kv motors, and caddx baby ratel. By far my favorite toothpick. I just got 5 more ELRS ep2 recievers for my other micros, they all had the XM+ in them. And boy I can feel a difference in latency. My 5" quads and cinewhoops run crossfire, but I'm thinking of getting the dual antenna elrs recievers for them as well, and just keep crossfire on my 4" explorer.

[nathanloopz]

im all about that fruity freestyle bro !!! so sick =) and no more props on the workbench ha ha

[MsStevieWoo]

Bluejay & emu on all my 75mm big love x

[Seii-FPV]

Just a quick question... I just flashed all my ESCs successfully with BlueJay v0.19, but I've noticed as soon as each ESC was flashed, motor direction went to NORMAL from previously picked REVERSED. Even in your video at 1:39 - 1:40 sec mark, your motor number 3 went back to NORMAL... in my case, all 4 went back to NORMAL setting. Is there anything I need to do regarding this? Thank you!

[Seii-FPV]

Another question - I designed and installed my own canopy for Mobula 7, and purchased/installed GepRC PEANO 50mm U.FL antenna instead of the stock one (significant improvement throughout the whole house, even basement), plus I've installed NEWBEEDRONE AZI 40mm tri-blade propellers (1.5MM HUB). My Mobula 7 came with X12 5-IN-1 AIO flight controller OpenVTX, Input Voltage: 1S, Max Continuous Current: 12A, Motors: 0802 20000KV. Originally the weight was around 25 grams, and now it's around 27-28 grams. Is that too much for these motors/ESC? I just don't want to burn anything for no reason. But I love my new canopy, TPU can stand millions of crashes, hits, any kind of abuse, and it will never break. Original canopy is so brittle and cracks super easy. Thanks in advance for your answer!

[lomokid]

My quad cannot take off the ground after ESCs are flashed. It's in a "runaway" mode which means that motors doing not what FC expects. I was able to fly right after flash operation completed but not after. Going back to Blheli_s, I think I was happy with it

[garykrygsman]

Great info again!! Have you used the v.21? I flashed v.21 today and it seems down on power 🤔

[athenovae]

What 1002 motors are you using and are these the PIDs for them? 2:42

[joelmuller]

Bro I need your help. My motors are stuttering or won't even start for the most part. And on top some motors are turning the wrong way.

[wiwibaguette]

hey man just a questin, ive lost some of the screws for the board to the frame, where can i get those

[jcardona]

Hello Shogunemperor, did enable bidirectional Dshot on the X12 board after installing Bluejay?

[MoeFPV]

thanks for the help - I always seem to have idle issues even with full power but it still takes off. Do you think a blue jay flash will be helpful for my other happymodel quads? I have the crux35, crux3 and bassline. I love them so much as is im afraid to change anything lol

[housinit]

Hey Shogunemperor, love the vids. Question, I've set up bluejay on a few of my quads, but this is the first time I'm hearing that you have to have the motors set to reversed in the configurator. Where did you learn that?

[Seii-FPV]

Would you recommend flashing BlueJay on the Mobula 7 1S with 0802 20000KV motors? And what settings should I pay attention to especially? I just want it to fly nicely, but to be updated with BlueJay, don't require any special PID tuning or anything like that. Thanks in advance!

[chopwhoopz]

Thanks I'll give a try tonight, props on make troubleshooting risky but made better video😂

[DonCarlyon]

Can I have the PID tune for the original motors?

[witek]

Hi, it is possible to use gemfan propellers 1635x3 on Mobula 7 1s on 0802 motors 20000kv, motors can handle it?

[rpid]

What's the advantage of having Bluejay and bidirectional DSHOT?

[hobikuhobimuhobikitasemua]

This set up for mobula 7 2S still relevan..?