DIY Rotating Time Lapse Base Tripod Mount: GoPro Tips and Tricks

GoPro Tips & Tricks
I create useful GoPro Tips and tricks videos. Make sure you subscribe to be notified about new videos. If you have enjoyed the video make sure to like / thumbs up and like GoPro Tips on facebook for the latest updates. If you have any question or comments please leave them below and if there are any mounts you would like explained or things that you would like to see how to mount your GoPro on, leave what they are in the comments below.

[Lund]

Just made one of these bad boys and it it awesome. Thanks again for sharing all this stuff, Kyle!

[jessebowden]

Kyle brother, thanks again!!! Very helpful. Any homemade horizontal track ideas or rigs? You are my authority on mounting and usage of my hero3-Blk. Thanks for all the vids, I hit like on em all. Keep it up!

[Metaskot]

Great Video - what time lapse setting have you found works best with the egg timer. Maybe show some examples?

[kylemartin]

Most of the time I use the .5 sec delay and a low resolution for the photos. I find if you make the delay much longer it will appear to rotate to fast.

[bluegrassengineer]

Suggestion:  using epoxy or other strong adhesive, attach a 1/4-20 nut to the bottom of the timer.  The center of the nut would be in line with the hole.  I think this would add some strength to the attach point.

[MarcWebster]

Anything over 1 sec usually creates a choppy turn! I'd still use full resolution though!

[kylemartin]

Sorry I did not added any I have some but it is not currently put together as a video. I will try to get some up but in the mean time look up GoPro time lapse on rotating base.

[Teartear]

is it possible to drill the hole with a 1/4 by 20 drill bit or is it necessary to use a tap? 

[JamesPickard]

Nice Video Mate,  Keep it up and post more videos soon. Also Check my videos out too if you like :D