Ramped sstc work in progress

preview_player
Показать описание

  1. MORGAN CHANDLER
Рекомендации по теме
Ramped sstc work 0:00:18

Ramped sstc work in progress

Variable Power Ramped 0:00:51

Variable Power Ramped SSTC

Ramped SSTC PLL 0:03:27

Ramped SSTC PLL Full Bridge (Tuned to 18 inch arcs 120VAC)

Ramped SSTC first 0:02:41

Ramped SSTC first light

ramped sstc 0:00:31

ramped sstc

Ramped Solid State 0:00:47

Ramped Solid State Tesla Coil (RSSTC) Finally!

Modified Beefy Slayer 0:05:05

Modified Beefy Slayer Exciter Circuit into a Single IGBT Ramped SSTC.

First try SSTC, 0:00:39

First try SSTC, irfp260 with feedback CT #shorts #sstc #tesla

qcw sstc 50v 0:00:42

qcw sstc 50v 14cm sparks

Miniature Tesla coil: 0:00:47

Miniature Tesla coil: QCW SSTC

Full power test 0:00:48

Full power test of my SSTC

PLL IRFP460 Half 0:03:06

PLL IRFP460 Half Bridge SSTC Unfiltered 120VAC 240W

SSTC PLL - 0:01:28

SSTC PLL - CW 5,4kVA ! (still in progress)

Larger simple sstc 0:00:17

Larger simple sstc

Single ırfp460 SSTC 0:00:16

Single ırfp460 SSTC

Single transistor sstc 0:00:16

Single transistor sstc

Prototype of a 0:00:21

Prototype of a driverless sstc running on half bridge mains

single mosfet sstc 0:01:46

single mosfet sstc and interrupter test

Tesla Coil version 0:05:26

Tesla Coil version 2

Pll-SSTC at 30V 0:00:48

Pll-SSTC at 30V

PLL sstc 240v 0:00:07

PLL sstc 240v

350W test 0:00:29

350W test

RSSTC work in 0:00:14

RSSTC work in progress😄#success#progress#like and subscribe for more content like this!

Комментарии
Автор

I read SSTC so naturally I had to check your vids and see this one with the ramping. I wasn't really sure but I felt like I had this going on sort of accidentally with the tuning on a couple of my coils. I was sort of just trial and error tuning some of them and noticed this ramp effect but just attributed it to other things like feedback issues then I started thinking maybe it was due to the coupling to where the feedback would hop different frequencies intermittently which weren't too far apart from each other so if the primary was lower than the secondary it may jump into this 'ramp' during breakout. But then too much arc loading would knock it into that lower duty cycle output. This is different from what an actual ramped SSTC does but it looks to be acting sort of the same as yours here. In your case is it a PLL and it's just finding the lock in frequency?

Magneticitist