BMW Carbon Fibre (CFRP) - PRODUCTION

BMW Carbon Fibre Production. How It’s made the BMW Car Factory. Production Plant about Carbon Fibre and specially CFRP (Carbon Fibre Reinforced Plastic). Assembly Line and Production stand in German BMW Car Factory #BMW #PRODUCTION #ASSEMBLY

🔔 Don’t miss next videos: Press the little bell ((🔔)) to get notifications

BMW conveyor manufactory

[carbonfibercreationswashin]

For those who are interested in high performance composite structures...bmw is using dry or semi-prepreg ( only for compaction and debunking reasons) The layers have some form of resin mildly applied between the layers or on the layers of carbon fiber. It is preheated and pressed and trimmed to form the preform. Then the laminate stack ( perform part) is placed in a heated RTM mold where resin is injected into the fiber areas of the mold cavity. More than likely they use a snap-cure resin. The molds are pressed together under tons of pressure to seal the mold closed and prevent any resin from escaping since the resin is injected under high pressure into the laminate. Lamborghini uses the same process RTM to make monocoque chassis for its Aventador model. Boeing is also tied into Lamborghini as they share technology and they made and patented Forged Carbon* ( Lamborghini Trade Name)

[thesighbored]

I would rather watch these types of videos than the trash on TikTok.

[GermanTopGameTV]

Anyone who has laminated Carbon by hand is gonna be super jealous about the infusion process they use here. The molds are perfect. No need for cloth, no need for vacuum, no 48 hour curing cycles, just piece goes in, resin squirted in quickly, boom piece done in perfect surface finish. That machine is a piece of Art. I'd love to have one of those at my disposal at any point in my life.

[chanthibcth]

I pray who ever reads this becomes successful

[rsdpt]

Professional tip: Always wear a mask wile working with carbon fiber and fiberglass.

[dubsydubs]

Good to see a budget factory making quality recyclable products, well done rich people, feck the planet there's money to be made.

[crautomotive]

It’s insane the amount of money on this machines to make a single roof, insane...

[rafaelmartins]

Lindo de ver ! Que capricho e dedicação para chegar na perfeição . Sensacional

[ДмитрийЧернов-еы]

8:10.На заводе BMW люди обтачивая наждачной бумагой деталь из углепластика работают без респираторов!Не ожидал!

[ywhenry]

8:16 sanding cabon fibre without mask 😱

[BassborusBeatz]

Ja da hab ich auch selbst gearbeitet in Landshut/Bayern i8 CFK Abteilung. Es waren ein schön Zeit...

[AllegedlySpiffy]

It's so much more interesting to watch a carbon fiber part being made by hand.. highly recommend it.

[gary]

I’m not sure what I love more the carbon fiber or all of the extruded aluminum 👍

[justaskforbobdesign]

seeing such a complex and labor-intensive process, I must say that for sure the margin profit of it must be over 50% such investment in equipment will be only justifiable by such a large profit margin per piece

[ronanrogers]

08:11 no dust mask? Maybe okay if you only ever do it once, but not if it’s your job

[out_on_bail]

Fun fact. My friend has an e92 comp pack and it was in a hail storm. The whole car was ruined but the roof was fine haha

[blainebolze]

Same thing for the guy at the trimming station, whenever I cut carbon cloth with scissors I would cough a lot, I recognized it and started masking for that too

[hayabusa]

When your roof was made by a guy wearing an early 2000s Ralf Schumacher Williams BMW F1 cap you know its legit

[christianpaulroldan]

That is awesome. A hydraulic pressed cf will be more consistent than vaccum press

[ttinnovations]

WOW, no wonder the price is soo crazy the material and labor and energy cost to make that part, when a piece of aluminum can be recycled at the end if its life, every interesting video