First Stage Scuba Regulator Service. Part 2: Assembly and adjustment.

DISCLAIMER:
Nothing contained in this video or shall be construed to over-ride or replace the relevant standards or manufacturer’s recommendations, manuals, data or product specific training. The contents are believed to be correct to the best of my knowledge and are offered in good faith. No warranty is expressed or implied. The author accept no liability for any loss, damage, injury or death resulting from information contained in this video. It is the responsibility of the viewer to verify the correctness of the information. Author strongly recommends to service scuba gear at authorized repair facility.

Update September 20, 2022: Deep Six Gear issued new updated version of Regulator Service Manual. New version is more detailed. On page 37 step 14 and 15 describe how to remove plug and replace O-rings in the adjustment knob of the Second Stage. I did not cover it in my video, not a critical step, but since it is now in the manual, please consider to follow.

[jeffworst]

You may have already seen this, but I posted a link on ScubaBoard to these videos. The author of the Deep 6 regulator maintenance manual, Jim Lapenta, commented that you did an excellent job.

[abettermousetrap]

Great tutorial video. Thanks from the Maritimes

[alex]

This is thorough enough to count as a service class. Thank you for putting the series together.

What is next?

[jeffzambran]

l watch both video, 1 & 2. Enjoy them immensely. l was hoping to see you do a Magnehlic (vacuum Test) and see the breathing effort., on the 2nd stage regulator.

[albertamato]

Thank you for this. You did a fantastic job! Looking forward to seeing the 1st stage video.

[allana]

Hi i just saw your videos, I'm from Mexico, it's really good tutorial congratulations, I have one question, what's the brand from the digital magnehelic that you use once you calibrate the second stage?
Thank you so much

[gaztinsley]

Thank you, just watched stage 1 and 2 servicing, Nice in depth And very informative !

[jeffzambran]

This was a very well put together video, l was hoping to see the Rebuilding kit, and what it contains. Possible where to buy it, and who manufactures it.

[kjdtm]

Q: why not grease the DIN retaining Wheel NUT interior ?

[dmartinez]

Thanks for sharing your knowledge. Is HOG D3 servicing similar to this one?

[jeffworst]

Excellent video. Why do you like to use a polyurethane o-ring vs. a Viton for the DIN to tank connection?

[kjdtm]

Q: Are you going to service also Mares or Apeks 1'st and 2'nd stages ?

[javymartin]

Great video! question? I see you used Tribolube-71 for the o-rings does it matter whether or not in the specs say to use Christolube?