Shure BLX How To: Set Best Channel

0:00 - How to Set Best Channel
0:10 - Preparation
Connect and turn on receiver
Keep the transmitter off

0:26 – Setting Up a Single Channel System
Press group to scan for best group and channel
Turn on the transmitter
Set it to the same group and channel
The single channel system is now ready to use

1:17 – Setting up a Multiple Channel System
Tip: BLX systems must be in the same frequency band for this procedure
Contact Shure for more information on band variations and frequency coordination
To setup another BLX receiver, keep the original receiver and transmitter on
Press and hold the group button on the next receiver until the display flashes then press group to select the same group
The receiver automatically performs a channel scan and selects the best available channel
Turn on the next transmitter
Set to the same group and channel as the receiver
Tip: Place BLX4 receivers side-by-side. Do not stack on top of each other
When using a BLX88 receiver,The group scan sets up both channels at the same time

2:54 Checklist
Ready LED on receivers - green
All receivers set to the same group

[hankmartin]

I've had this system for 2 years and never really understood how to set the channels for each side. I have the dual with 2 mikes. The instructions were great and now working flawlessly. Directions will work for dual same as Youtube instructed adding a second. thank you.

[grvocl]

My BLX lavalier drops a lot when in use .... There are no visible antennas and I don't know how to keep the mic from dropping

[djsean]

one of my mics on the blx88 has got low or no bass compared to the other one how do I sort this

[MartinloveMary]

What’s the relation between group and channel in a multiple system setup. They must in the same group ? I am confused with this

[seventh-oneproductions]

Seems mic is having trouble syncing. Did as video shows but then the mic makes a “bump” sound louder and louder as it alternates between the letter and number until the mic turns off (light turn red).

[Tmankali]

How do you set a dual? Would be same group and same channel's for 2nd mic? Or same group different channel? Or what auto scan finds for 2nd mic as well? Appreciate a response thx