Terminate Fiber in 5 Minutes

Learn how to terminate fiber cable in under 5 minutes using NeoPro's AFL/FAST termination kit.

[cwchee]

Major wrong step: The cleaning needs to be done after stripping the fiber and before the cleaving

[thomasrauch]

The second coding is NOT cladding it’s the 260 micron primary buffer coating, the core glass and the cladding glass are something you never strip mostly because it’s not possible.

[FireFistAce]

In order to know it's going to work you need a fiber light passing through... Fiber is not easy to terminate due to the fact that terminating like this doesn't work unless you have years of experience and don't need a fiber light on the other end to ensure the light is passing through.

[ZoZo-]

thanks for sharing your professional skill.❤

[masonpommarane]

Should’ve cleaned after the cladding not the cleave.

[nlbv]

I'm brand new to this! done copper for years and years.
There seems to be very little information easy to find for beginners.
When do you have to use glue/epoxy in the connectors? and when do you need to polish the ends?
Are people just being lazy and not doing it witch cheap connectors and cheap cleavers?
Or is this more something you have to worry about with multimode and long distances and worrying more about losses?
Whereas with multimode/local stuff people just are not worrying about this?

[mdhadi]

Cleaning after cleaver??!!!it will damage end of the fiber

[ltmote]

This video makes it look super easy. Thanks for the video, do you have a link to this kit?

[sixthegr]

Whooooa. You cleaned after the cleave. 🤦🏾‍♂️🤦🏾‍♂️

[chicahaga]

I'm not sure why it was stripped so far. Most of that gets cleaved off.

[berniemchenry]

Thank you for this video. What’s the name of the tool that you’re removing at 4:45?

[Beachnative]

Is this music from a 70's porn movie?

[themessenjur]

Awesome video, quick question, where did you get the neo pro fiber stripping gauge? I would like to get one. Thanks

[andrewngwenya]

this is the very best way of terminations, many thanks

[lennynaicker]

thanks mate where in brisbane can i buy a mechaniclal splice please

[alsrmurad]

what is the name of this kit and where to buy this?

[hippopotamus]

Instructions not clear, got soldering iron stuck in the cleaver tool.

[BruceDavis]

I would like to go to a school to learn how to do this to complete my low voltage exp. Any help?

[arrowarrow]

set သုံးတာ types မရွေးပါနှင့် law အရရွေး ကျန်တာမရွေးပါနှင့်

[dbm]

Clean before you cleave, nothing is cleaner than freshly cleaved glass IMHO