ROTOR 12s installation on R9200 and R8100 Cranks

preview_player
Показать описание
To install ROTOR® 12s Shimano® Compatible Chainrings on R9200 and R8100 the installation of a 0,5 mm washer could be needed.
We recommend the installation of this spacer between BB and crank to ensure good shifting, but it's not needed in every case.
_________________________________________
Para instalar platos compatibles con Shimano® ROTOR® 12s en R9200 y R8100 puede ser necesaria la instalación de una arandela de 0,5 mm.
Recomendamos la instalación de este espaciador entre el pedalier y la biela para asegurar un buen cambio, pero no es necesario en todos los casos.

ROTOR® All Rights Reserved
  1. ROTOR Bike Components
Рекомендации по теме
ROTOR 12s installation 0:00:24

ROTOR 12s installation on R9200 and R8100 Cranks

New 12s ROTOR 0:00:17

New 12s ROTOR Chainrings

Nuevos platos ROTOR 0:00:17

Nuevos platos ROTOR 12s

Chain Drop! Must 0:03:06

Chain Drop! Must watch before upgrade your Carbon-ti chainrings with Dura Ace R9270 12s.

Avoid This Common 0:02:13

Avoid This Common Shimano Crank Installation Pitfall

Crank set DURA 0:00:24

Crank set DURA ACE r9200 #shimano #cycling

Which Shimano Ultegra 0:00:12

Which Shimano Ultegra rotor is your favorite?

Plateaux Rotor Qrings 0:00:32

Plateaux Rotor Qrings pour pédaliers Shimano 12 vitesses Ultegra série 8100 et Dura Ace série 9200....

SHIMANO 12s Cassette 0:00:38

SHIMANO 12s Cassette CS-R9200 #SHORTS

How to install 0:01:01

How to install a 30mm crankset on CyclingCeramic Bottom bracket

From Rotor to 0:01:57

From Rotor to Shimano Crankset

Ultegra vs XTR 0:00:15

Ultegra vs XTR rotor

Shimano Dura Ace 0:00:37

Shimano Dura Ace R9200 Crankset: Real Weight

Remove and Reinstall 0:01:17

Remove and Reinstall Rotor cranks

#shorts Nothing better 0:00:11

#shorts Nothing better than some fresh Dura-Ace Rotors!

Astuce montage : 0:00:49

Astuce montage : Comment serrer des manivelles Rotor Aldhu ou Vegast ?

How to Reassemble 0:02:07

How to Reassemble a Dura Ace 9200 12 Speed Cassette

How to install 0:04:53

How to install ROTOR crank bolts (English Subtitles)

IS THIS THE 0:17:00

IS THIS THE BEST UPGRADE FOR YOUR BIKE?

Dura Ace 9270 0:17:15

Dura Ace 9270 12 speed arrived! Actual weights & Installation notes

Shimano Deore XT 0:00:14

Shimano Deore XT 🔥 #Shimano #MTB #Mountainbike #Rotor #Sirocco #Rotation #Shorts #Disc #Cycling

Winter Servicing - 0:01:51

Winter Servicing - Rotor Crankset Removal

Rotor Axles and 0:00:55

Rotor Axles and Crank Arm Length Guide For Road/Gravel/CX

Aldhu Inspider 12V 0:01:46

Aldhu Inspider 12V

Комментарии
Автор

Should tell ur customers to buy the nuts and bolts for it too!!!

sidberghmans
Автор

Hola tengo una canyon speedmax cfr disc con Shimano R9250 necesito colocar el espaciador de 0, 5 mm

Colmenabbq
Автор

Is the shifting performance degraded at all with Q-Rings?

HazzyWazzey
Автор

Do I still require a 0.5mm washer if my 8100 crank with Rotor rings is used in a 11 speed bike? The reason I ask is the 8000 (11 speed) has a chain line of 43.5mm, and the 8100 has a chain line 44.5mm. if the 8100 with rotor rings require a 0.5m washer to retain chain line specs, then leaving it without would result in a 44.0mm chainline, closer to the 8000 chain line of 43.5mm and not requiring a washer on the non-drive side pedal, no?

DMW