D.I.Y. Fishing Rod Storage Rack Wall Mount (CHEAP EASY BUILD)

#fishingrodholder #diyfishingrodrack #diyideas #diy #fishingrodrack

I've had enough of unorganized fishing rods so in today's video I put an end to that. I've tried several different options in the past and was never really satisfied. I wanted something I could customize to fit what I need and also look good and not too tacky. And after searching amazon for fishing rod storage, I finally found something I thought would be perfect!

THANKS FOR WATCHING

LAST VIDEO: EASY Braid to Leader Knot (Uni to Uni Knot)

MY BOAT: Xpress X18 Pro Bass Boat - FULL TOUR & REVIEW (ONE YEAR LATER)

(Amazon affiliate links below)

FISHING TOOLS I USE

BOAT ACCESSORIES

MY FAVORITE FISHING CLOTHES

CAMERA GEAR I USE

#diy #diyfishing #fishingrodrack #diycrafts #fishinghack #amazonfinds #fishingrodstorage #fishingtips #fishingvideos #fishingvideo #fishingknot #bassfishing #rodmount #fishingrodmount

[watcherwatchmen]

Great job. I'm not sure if you mentioned it, but if you're going to mount something to the wall, you should screw into the studs, not just the drywall. Or Use drywall anchors. Will it work the way you showed? Yes, but a stud will allow you to pull away from the wall without possibly yanking out the screws in the drywall which is pretty weak by its self. Thanks for the video!

[carolinacoins]

Thanks for taking the time to research, record, edit the video and share with us. Fantastic idea. I just ordered my 40 pack.

[MrJmhess]

This is genius man! Thanks for putting in the hard work on Amazon to find these little clips. I will be grabbing my 40 pack this week.

[joelsweeney]

Super sick man. Thanks for sharing. I’ve been going around in circles trying to figure out a diy rod rack

[utubepablotx]

Perfect, flexible design for wall mounts. Also easy to add bottom piece/shelf to keep rods off floor. Just order my 40 pack. Also have recently started using similar rod covers. good job and thanks. will check out your other vidoes.

[caribbeanbound]

nice idea. I put hooks on the rafters of my ceiling of my garage so all my rods are out of the way and neatly above me.

[hamccall]

Just saw you TikTok on this, and it’s now on my to do list for next week. Great video, had to subscribe.

[reyvynnightveil]

For that one that is too thin, just a strip of black foam tape inside would close the gap and catch it, so you don't have the hard edge torqueing against the rod.

Otherwise, frickin awesome solution.

[jackdevine]

great video, my garage looks like your before picture, thank you

[MScott-yg]

I think the ball plumb out of the park. Very

[StingofTruth]

Dude thanks for the link! Last year i bought a revolving rod rack with clips like that and they were kinda small and broke apart so i replaced them with these plastic clips that peel and stick for plant vines. I'm gonna try these and hope they're bigger than the original ones that came with my stand

[MyChaoticFishing]

Found your channel from my shorts feed. I guess somebody made a big wake and yall took water over the bow. Watched the first video and I hit that subscribe button. 🤘 good stuff dude. I scored an old display stand from Academy for my Rod storage but am still looking at other options.

[michaelslawinski]

Nice! I'm gonna copy your set up!

[jdrodriguez]

Thanx for the video! been thinking of a DIY rod rack and this was it! just genius!

[paulorigon]

Very cool idea. Could you also use for big reels (talicas 25 and 50?)

[daver]

Great Idea....I wouldve kept them off the floor. Maybe a horizontal piece of wood with a hole cutout (2x4) nailed to a 1x4 thats mounted on the wall. Otherwise, great idea....I only have 4 rods...but even those are a nuisance. Thanks Much

[hydrostream]

i've been looking, came across this vid
Awesome
This is what i'm doing as well
Thanks Bro

[WhereWeWild]

Sweet. I’m looking into building one of my own and came across this vid 😁 I’ve tried all the Amazon ones and they all suck. The foam ones are a headache, the plusinno one seems to mark up and damage the rods cause it squeezes them too hard, the kastking one has problems where you can’t really fit as many rods as they claim on it 🤷🏻‍♂️ Might have to try these clips and see what I can come up with. 🤔 Thanks for sharing the idea, appreciate ya. 👊🏽

[rchrisholland]

Exactly like my dad's 50 across garage wall

[whitneymccoy]

I'm going to get some of these. Thanks for the tip!